OSHA Inspection: BI-STATE TRUCK REPAIR INC.

Issued

2015-09-18 00:00:00

Abate by

2015-10-15 00:00:00

Penalty

Initial $1600.00 · Current $960.00 Reduced

General-duty citation text

29 CFR 1910.177(d)(4): The employer did not furnish or assure that employees use an air line assembly which includes a clip-on chuck, an inline valve with a pressure gauge or a presettable regulator, and a sufficient length of hose between the clip-on chuck:     The employer failed to assure employees used an airline assembly which includes a clip-on chuck, an inline valve with a pressure gauge or a presettable regulator, and a sufficient length of hose between the clip-on chuck.

Issued

2015-09-18 00:00:00

Abate by

2015-10-15 00:00:00

Penalty

Initial $2800.00 · Current $1680.00 Reduced

General-duty citation text

29 CFR 1910.177(f): The employer did not establish a safe operating procedure for servicing multi-piece rim wheels which contained, at a minimum, the elements listed in 29 CFR 1910.177(f)(1) through (11):     The employer failed to establish safe operating procedures for servicing multi-piece rim wheels which contained, at a minimum, procedures for:       1.   Deflation of tires before dismounting.    2.   Rubber lubricant application.    3.   Inflating tires on a vehicle, outside of a restraining device, and the use of restraining devices.    4.   Inspections after inflation.    5.   Methods to correct seating of side and locking rings.    6.   Prohibition for reworking damaged rim components.      7.   Employee positions when handling multi-piece wheel rims.    8.   Prohibition for applying heat to multi-piece wheel components.