Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: SUPREME MANUFACTURING COMPANY, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SUPREME MANUFACTURING COMPANY, INC. in 5 CONNERTY CT., EAST BRUNSWICK, NJ 08816 (NAICS 312111). OSHA activity number 340482736.

Watch Supreme Manufacturing Company, INC. — free Get an email when a new federal OSHA severe-injury report for Supreme Manufacturing Company, INC. is published. One employer, no account, unsubscribe in one click.
Site address
5 CONNERTY CT.
City
EAST BRUNSWICK
State
NJ
ZIP
08816
Mailing
5 CONNERTY CT., EAST BRUNSWICK, NJ 08816
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
312111
Employees
28
Ownership type
A

4 citations on file for this inspection.

1910.110 F06 II

Serious Gravity 1 1 instance 28 exposed
Issued
Penalty
Initial $2100.00 · Current $1365.00 Reduced
29 CFR 1910.110(f)(6)(ii): Containers were not in a suitable enclosure or otherwise protected against tampering:    a- Supreme Manufacturing Co., Inc., East Brunswick, NJ, Outside propane storage cage - One (1) cylinder of propane was stored outside of the cage.      Condition noted on or about 3/18/15.
Recent events (2)
  • — I (S) $1365
  • — Z (S) $2100

1910.219 D01

Serious Gravity 5 2 instances 28 exposed
Issued
Penalty
Initial $2800.00 · Current $1820.00 Reduced
29 CFR 1910.219(d)(1):  Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section:    a- Supreme Manufacturing Co., Inc., East Brunswick, NJ - Production Room "B" - Kettles, such as but not limited to, #2 & #3, had unguarded pulleys.    Condition noted on or about 3/18/15.
Recent events (2)
  • — I (S) $1820
  • — Z (S) $2800

1910.219 E01 I

Serious Gravity 5 2 instances 28 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven (7) feet or less from the floor or work level were not guarded with a guard that extended to at least fifteen inches above the belt:  a- Supreme Manufacturing Co., Inc., East Brunswick, NJ, Production Area "B" - Kettles, such as but not limited to "2 & #3, had unguarded belts.  Condition noted on or about 3/18/15.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H03 IV

Other-than-serious 1 instance 28 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(h)(3)(iv): The details of the hazard communication program developed by the employer, did not include an explanation of the safety data sheet, including the order of information and how employees can obtain and use the appropriate hazard information:  a- Supreme Manufacturing Co., Inc., East Brunswick, NJ - Employee training on the new label requirements and the safety data sheet (SDS) format for the revised hazard communication standard (HCS) was not conducted.  Condition noted on or about 3/18/15.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340482736.