Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

PHELPS, NY —

OSHA Inspection: Z-AXIS, INC.

Planned inspection · Health discipline

At a glance

On , OSHA opened a planned health inspection of Z-AXIS, INC. in 1916 ROUTE 96, PHELPS, NY 14532 (NAICS 334418). OSHA activity number 340558295.

Watch Z-Axis, INC. — free Get an email when a new federal OSHA severe-injury report for Z-Axis, INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
Z-AXIS, INC.
Site address
1916 ROUTE 96
City
PHELPS
State
NY
ZIP
14532
Mailing
1916 ROUTE 96, PHELPS, NY 14532

What kind of inspection was it?

Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
334418
Employees
85
Ownership type
A

Citations

4 citations on file for this inspection.

1910.212 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1820.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1):  One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created point of operation, rotating parts, and flying chips:     a)  ME Shop, on or about 4/14/15:  Bridgeport Mill was not provided with a chuck and tool guard.    b)  ME Shop, on or about 4/14/15:  Sears Craftsman 8" Drill Press was not provided with a chuck and tool guard.    c)  ME Shop, on or about 4/14/15: Craftsman Drill was not provided with a chuck and tool guard.
Recent events (2)
  • — I (S) $1820
  • — Z (S) $2800

1910.215 A04

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1820.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4):  Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:    a)  ME Shop, on or about 4/14/15:  A Tradesmen 6" Bench Grinder had an opening between the work rest and grinding wheel that measured 5/8-inch at the left wheel.
Recent events (2)
  • — I (S) $1820
  • — Z (S) $2800

1910.215 B09

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9):  The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  a) ME Shop, on or about 4/14/15: Tradesmen 6" Bench Grinder, was missing tongue guard on the left side.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C06 I

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2100.00 · Current $1365.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i):  The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed:    a) Z-Axis, Inc., on or about 4/14/15:  No periodic inspection was conducted of the energy control procedure to ensure that the procedures and requirements of the standard were being followed.  Employees perform servicing and/or maintenance on various machinery or equipment including but not limited to: Amister Axial Inserter.
Recent events (2)
  • — I (S) $1365
  • — Z (S) $2100

More inspections in this industry (NAICS 334418)

More inspections in NY

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340558295.