OSHA Inspection: EXACT CUTTING SERVICE, INC.

Issued

2015-06-25 00:00:00

Abate by

2015-07-31 00:00:00

Penalty

Initial $2800.00 · Current $1400.00 Reduced

Hazardous substances 8870

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    On or about April 14, 2015, the employer failed to ensure employees cleaning and maintaining the following equipment utilized lockout/tagout procedures:      a. HA-16 Johnson Amada Saw, model number HA-16, serial number 401575  b. HA-16 Johnson Amada Saw, model number HA-16, serial number 401698  c. HA-16 Johnson Amada Saw, model number HA-16, serial number 401396  d. HA-16 Johnson Amada Saw, model number HA-16, serial number 401530  e. Hatachi Seiki 23-SII Lathe, model number HT23S II, serial number HTS 2636 HL  f.  LeBlond Lathe, serial number 7E1781

Issued

2015-06-25 00:00:00

Abate by

2015-07-15 00:00:00

Penalty

Initial $2800.00 · Current $1400.00 Reduced

Hazardous substances 8870

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:    On or about April 14, 2015, the employer failed to ensure lockout/tagout procedures were audited annually to ensure no changes were made for the following equipment:      a. HA-16 Johnson Amanda Saw, model number HA-16, serial number 401575  b. HA-16 Johnson Amanda Saw, model number HA-16, serial number 401698  c. HA-16 Johnson Amanda Saw, model number HA-16, serial number 401396  d. HA-16 Johnson Amanda Saw, model number HA-16, serial number 401530  e. Hatachi Seiki 23-SII Lathe, model number HT23S II, serial number HTS 2636 HL  f.  LeBlond Lathe, serial number 7E1781

Issued

2015-06-25 00:00:00

Abate by

2015-07-15 00:00:00

Penalty

Initial $2800.00 · Current $1400.00 Reduced

Hazardous substances 8870

General-duty citation text

29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees:    On or about April 14,, 2015, the employer failed to ensure employees cleaning and maintaining the following equipment were trained as authorized employees:      a. HA-16 Johnson Amanda Saw, model number HA-16, serial number 401575  b. HA-16 Johnson Amanda Saw, model number HA-16, serial number 401698  c. HA-16 Johnson Amanda Saw, model number HA-16, serial number 401396  d. HA-16 Johnson Amanda Saw, model number HA-16, serial number 401530  e. Hatachi Seiki 23-SII Lathe, model number HT23S II, serial number HTS 2636 HL  f.  LeBlond Lathe, serial number 7E1781

Issued

2015-06-25 00:00:00

Abate by

2015-07-30 00:00:00

Penalty

Initial $2000.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.179(j)(2)(iii): Monthly inspections of hooks, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the hook inspected, were not performed:    a.  On or about April 14, 2015, the employer failed to ensure certified hook inspections were performed and documented for the 2-ton Shaw Box crane model number 80L03-03S18-1, serial number 00G6834 located in the production room.    b. On or about April 14, 2015, the employer failed to ensure certified hook inspections were performed and documented for the 2-ton Shaw Box crane model number 80L03-03S18-1, serial number 00G6834 located in the production room.

Issued

2015-06-25 00:00:00

Abate by

2015-07-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.179(j)(2)(iv): Monthly inspections of hoist chains, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and an identifier of the chain which was inspected, were not performed:  a. On or about April 14, 2015, the employer failed to ensure certified wire rope inspections were performed and documented for the 2-ton Shaw Box crane model number 80L03-03S18-1, serial number 00G6834 located in the production room.  b. On or about April 14, 2015, the employer failed to ensure certified wire rope inspections were performed and documented for the 2-ton Shaw Box crane model number 80L03-03S18-1, serial number 00G6834 located in the production room.

Issued

2015-06-25 00:00:00

Abate by

2015-07-30 00:00:00

Penalty

Initial $2800.00 · Current $1400.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    On or about April 14, 2015, the employer failed to ensure employees operating the following machinery were protected against contact with the rotating spindle or flying debris by having an operational interlock or other form of machine guarding in place:      a. Hatachi Seiki 23-SII Lathe, model number HT23S II, serial number HTS 2636 HL (rotating spindle)  b. Amada HA-250 G, model number HA-250, serial number 456747 (saw blade)  c. Amada HA-250 G, model number HA-250, serial number 459377 (saw blade)  d. LeBlond Lathe, serial number 7E1781 (rotating spindle)  e. Allen Drill Press, serial number KH23744 (rotating spindle)  f.  Enco Drill Press, serial number B8-00-155 (rotating spindle)

Issued

2015-06-25 00:00:00

Abate by

2015-07-15 00:00:00

Penalty

Initial $1600.00 · Current $800.00 Reduced

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:    On or about April 14, 2015, the Dayton 3M deburring machine, model number 6K483B, used a household wall mounted flush box to turn the equipment on and off.