OSHA Inspection: DYNAMIC FABRICATION AND FINISHING, LLC.

Issued

2015-09-18 00:00:00

Abate by

2016-01-22 00:00:00

Penalty

Initial $4900.00 · Current $3920.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:    (a) Dynamic Fabrication and Finishing, LLC; The employees were performing servicing and maintenance on machines such as but not limited to the plasma welding table, manual welders, robot welders, presses, and other miscellaneous equipment which the employer did not establish an adequate energy control program to prevent hazardous energy release.

Issued

2015-09-18 00:00:00

Abate by

2015-11-09 00:00:00

Penalty

Initial $4200.00 · Current $3360.00 Reduced

General-duty citation text

29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    (a) Main production area; Employees are exposed to corrosive chemical mixtures including Chem Cote 3026 which contains corrosive chemicals such as but not limited to phosphoric acid and linear alcohol alkoxylate without access to a suitable facility for quick drenching of the body.

Issued

2015-09-18 00:00:00

Abate by

2016-01-22 00:00:00

Penalty

Initial $2800.00 · Current $2240.00 Reduced

General-duty citation text

29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates or markings were maintained in a legible condition:    (a)Warehouse area; The Caterpillar 5000 lbs. Forklift's name plate was illegible as it was faded and not readable.

Issued

2015-09-18 00:00:00

Abate by

2015-11-09 00:00:00

Penalty

Initial $4200.00 · Current $3360.00 Reduced

General-duty citation text

29 CFR 1910.254(d)(9)(iii): Cables with damaged insulation or exposed bare conductors were not replace:    (a) Manual welding area; Employees are exposed to welding leads and cables with damaged insulation while performing manual welding operations.

Issued

2015-09-18 00:00:00

Abate by

2015-11-09 00:00:00

Penalty

Initial $4200.00 · Current $3360.00 Reduced

General-duty citation text

29 CFR 1910.332(b)(1): Employees were not trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertained to their respective job assignments:    (a) Manual welding area; Welders have not received basic electrical training for safety-related work practices. Welders are identified as employees who have a higher than normal risk of electrical accident and are required to be trained and familiar with the safety-related work practices of electricity.