Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: LOUIS DION INC.

Follow-up inspection · Safety discipline

On , OSHA opened a follow-up safety inspection of LOUIS DION INC. in 15 DUNE RD., WATER MILL, NY 11976 (NAICS 238130). OSHA activity number 340735695.

Watch Louis Dion INC. — free Get an email when a new federal OSHA severe-injury report for Louis Dion INC. is published. One employer, no account, unsubscribe in one click.
Establishment
LOUIS DION INC.
Site address
15 DUNE RD.
City
WATER MILL
State
NY
ZIP
11976
Mailing
8 BELTON CT, BABYLON, NY 11702
Inspection type
Follow-up (F)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
45
Ownership type
A

4 citations on file for this inspection.

1926.501 B13

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $3500.00 · Current $2625.00 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):  a) Worksite: Employees who were working on the first floor of the residential building and retrieving tools and materials near unprotected sides were exposed to falls of approximately 10 ft.; on or about 6/24/15.  Note:  The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $2625
  • — Z (S) $3500

1926.502 B02

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $3500.00 · Current $2625.00 Reduced
29 CFR 1926.502(b)(2): Midrails, screens, mesh, intermediate vertical members, or equivalent intermediate structure members were not installed between the top edge of the guardrail system and the walking/working surface when there was no wall or parapet wall at least 21 inches (53 cm) high:  a) Worksite: Employees carrying tools and materials from the ground floor to the first floor were using a walking/working surface that did not have intermediate structural members installed between the top edge of the guardrail system and the walking/working surface and were exposed to falls of approximately 10 ft.; on or about 6/24/15.  Note:  The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $2625
  • — Z (S) $3500

1926.1052 C04

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1052(c)(4): Midrails, screens, mesh, intermediate vertical members, or equivalent intermediate structural members were not provided between the top rail of the stairrail system and the stairway steps:    a) Worksite: Employees carrying tools and materials from the ground floor to the first floor were using stairs that were not provided with intermediate structural members and were exposed to falls of up to and including approximately 10 ft.; on or about 6/24/15.  Note:  The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1053 B13

Serious Gravity 1 1 instance 1 exposed
Issued
Penalty
Initial $2100.00 · Current $1575.00 Reduced
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step:  a) Worksite: An employee was using the top and top step of a stepladder to do overhead framing work; on or about 6/24/15.   Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (2)
  • — I (S) $1575
  • — Z (S) $2100

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340735695.