Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JOSHUA STEELE

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JOSHUA STEELE in 6537 DIXIE HWY, FAIRFIELD, OH 45014 (NAICS 238170). OSHA activity number 340754522.

Watch Joshua Steele — free Get an email when a new federal OSHA severe-injury report for Joshua Steele is published. One employer, no account, unsubscribe in one click.
Establishment
JOSHUA STEELE
Site address
6537 DIXIE HWY
City
FAIRFIELD
State
OH
ZIP
45014
Mailing
521 N. 7TH STREET, HAMILTON, OH 45011
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238170
Employees
3
Ownership type
A

2 citations on file for this inspection.

1926.453 B02 V

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $0.00 Reduced
29 CFR 1926.453(b)(2)(v): A body belt shall be worn and a lanyard attached to the boom or basket when working from an aerial lift:  Located on the North Side of a commercial structure, one employee was observed working inside the basket of a Genie Z-60/34 Articulating Boom Lift installing siding and exposed to a fall hazard approximately 13 feet above ground level without being attached to the boom or basket.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1926.501 B01

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.501(b)(1): "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:  On or about July 6, 2015 an employee was observed standing on a commercial structure performing siding work of an exterior structure while not utilizing an adequate fall protection systems.  Employee was exposed to a potential fall height that measured to be 15'-8" above the ground below.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340754522.