OSHA Inspection: PREMIER TRUCK GROUP NORTH TEXAS

Issued

2015-10-01 00:00:00

Abate by

2015-10-30 00:00:00

Penalty

Initial $4500.00 · Current $2700.00 Reduced

General-duty citation text

29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:    At the establishment, in the shipping/receiving area, the 10ft high overhead storage area was not equipped with standard railings, exposing employees to the hazard of falling approximately 10 feet to lower levels.

Issued

2015-10-01 00:00:00

Abate by

2015-10-30 00:00:00

Penalty

Initial $5400.00 · Current $3240.00 Reduced

General-duty citation text

29 CFR 1910.133(a)(1): Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment:  At the establishment, in the mechanic shop, employees operating hand held tools to service commercial trucks were not provided with eye protection, exposing employees to the hazard of eye injury and irritations.

Issued

2015-10-01 00:00:00

Abate by

2015-10-30 00:00:00

Penalty

Initial $5400.00 · Current $3240.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):   At the establishment, in the shipping department, an employee driving the Komatsu 5500 pound forklift, serial number 569673A, model FD25T, was not trained, exposing employees to the hazard of being struck by the lift.

Issued

2015-10-01 00:00:00

Abate by

2015-10-30 00:00:00

Penalty

Initial $3600.00 · Current $2160.00 Reduced

General-duty citation text

29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective:    At the establishment, in the shop area, the power cord powering the Maxess floor fan had the ground prong missing, exposing employees to the hazard of electrical shock.

Issued

2015-10-01 00:00:00

Abate by

2015-10-30 00:00:00

Penalty

Initial $4500.00 · Current $2700.00 Reduced

General-duty citation text

29 CFR 1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, material safety data sheets, and employee information and training will be met, and which also includes the following:   At the establishment, hazard communication program was not developed or maintained when employees were using chemicals such as but not limited to, 3M General Trim Adhesive, and 3M Super Spray Adhesive, exposing employees to the hazard of skin irritations.

Issued

2015-10-01 00:00:00

Abate by

2015-10-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:   At the establishment, the American LaFrance fire extinguisher was not identified, exposing employees to the hazard of fire.