OSHA Inspection: DIVERSIFIED INDUSTRIAL SERVICE COMPANY

Issued

2015-10-02 00:00:00

Abate by

2015-11-05 00:00:00

Penalty

Initial $1785.00 · Current $1250.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operators performance was not conducted at least once every 3 years:  An evaluation of the powered industrial truck (forklift) operators was not conducted as part of the training conducted at the facility. Employees were exposed to a struck-by hazard.

Issued

2015-10-02 00:00:00

Abate by

2015-10-29 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated to operate the powered industrial truck as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.  The employer did not ensure that the required certification was completed and available. Employees were exposed to a struck-by hazard.

Issued

2015-10-02 00:00:00

Abate by

2015-11-05 00:00:00

Penalty

Initial $1785.00 · Current $1250.00 Reduced

General-duty citation text

29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months:  A complete periodic inspection of the 10 ton Medor Model 2824 hoist/crane had not been performed since May of 2013. Employees are exposed to struck-by hazards.

Issued

2015-10-02 00:00:00

Abate by

2015-10-29 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.184(i)(1): Synthetic web sling(s) were not marked or coded to show rated capacities for each type of hitch and type of synthetic web material:  In the shop, the codes/rated capacities were no longer legible on two synthetic web slings being utilized. Employees are exposed to struck-by hazards.

Issued

2015-10-02 00:00:00

Abate by

2015-11-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  Employees perform servicing and maintenance activities on equipment including, but not limited to, two metal presses which have multiple energy sources including electrical, hydraulic and gravity. At the time of the inspection procedures were not available to be utilized during these activities.

Issued

2015-10-02 00:00:00

Abate by

2015-11-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(7)(iv): The employer did not certify that each authorized and affected employee training had been accomplished. The certification shall contain each employee's name and dates of training:  Training certification for the authorized employees performing lockout and those employees affected by the lockout was not available.