Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: HUDSON MANAGEMENT & CONSULTING GROUP LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of HUDSON MANAGEMENT & CONSULTING GROUP LLC in 16-12 CENTRAL AVE, FAR ROCKAWAY, NY 11691 (NAICS 236220). OSHA activity number 340805175.

Watch Hudson Management & Consulting Group LLC — free Get an email when a new federal OSHA severe-injury report for Hudson Management & Consulting Group LLC is published. One employer, no account, unsubscribe in one click.
Site address
16-12 CENTRAL AVE
City
FAR ROCKAWAY
State
NY
ZIP
11691
Mailing
118 W 22ST, NEW YORK, NY 10011
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
8
Ownership type
A

5 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $3500.00 · Current $3500.00
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  a) On or about July 28, 2015- job site at 16-12 Central Ave, Far Rockaway, NY 11691  the employer permitted an employee to use a DeWalt DWE 4011 angle grinder to cut tile without wearing eye  protection.  WRITTEN ABATEMENT CERTIFICATION IS NOT REQUIRED.
Recent events (1)
  • — Z (S) $3500

1926.300 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $3500.00 · Current $3500.00
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use:  a) On or about July 28, 2015- job site at 16-12 Central Ave, Far Rockaway, NY 11691  the employer permitted an employee to cut tile, using a DeWalt DWE 4011 angle grinder without a guard.  WRITTEN ABATEMENT CERTIFICATION IS REQUIRED.
Recent events (1)
  • — Z (S) $3500

1926.403 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $3500.00 · Current $3500.00
29 CFR 1926.403(b)(1): Employer did not ensure that electrical equipment is free from recognized hazards that are likely to cause death or serious physical harm to employees:  a) On or about July 28, 2015- job site at 16-12 Central Ave, Far Rockaway, NY 11691  the employer permitted employees to use flexible cord sets, that had damage to the outer cover, to power an angle   grinder and fan.  WRITTEN ABATEMENT CERTIFICATION IS NOT REQUIRED.
Recent events (1)
  • — Z (S) $3500

1926.403 B01 I

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.403(b)(1)(i): Safety of equipment was not determined on the basis of suitability of the equipment for an identified purpose as evidenced by listing, labeling, or certification for that identified purpose:  a) On or about July 28, 2015- job site at 16-12 Central Ave, Far Rockaway, NY 11691  the employer permitted employees to use metal outlet boxes, that are designed to be mounted on the wall, as a   portable pendant.  WRITTEN ABATEMENT CERTIFICATION IS NOT REQUIRED.
Recent events (1)
  • — Z (S) $0

1926.405 B02

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.405(b)(2): In an energized installation, each outlet box did not have a cover, faceplate, or fixture canopy.  a) On or about July 28, 2015- job site at 16-12 Central Ave, Far Rockaway, NY 11691  the employer permitted employees to plug in flexible cord sets into energized outlets that did not have covers installed.  WRITTEN ABATEMENT CERTIFICATION IS REQUIRED.
Recent events (1)
  • — Z (S) $0

View HUDSON MANAGEMENT & CONSULTING GROUP LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340805175.