Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: EASY REACH, INC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of EASY REACH, INC in 32 RASPBERRY LANE, HATTIESBURG, MS 39401 (NAICS 333249). OSHA activity number 340844315.

Watch Easy Reach, INC — free Get an email when a new federal OSHA severe-injury report for Easy Reach, INC is published. One employer, no account, unsubscribe in one click.
Establishment
EASY REACH, INC
Site address
32 RASPBERRY LANE
City
HATTIESBURG
State
MS
ZIP
39401
Mailing
P.O. BOX 1019, PETAL, MS 39465
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333249
Employees
30
Ownership type
A

6 citations on file for this inspection.

1910.22 A01

Other-than-serious 1 instance 30 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1000.00 Reduced
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition.    (a) Production Floor - On or about August 12, 2015 there were electrical cords and hoses on the floor which posed a trip hazard for employees working and walking near equipment.
Recent events (2)
  • — I (O) $1000
  • — Z (S) $2800

1910.212 A01

Serious Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $4900.00 · Current $3100.00 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:      (a)  Production Floor - On or about April 14, 2015, the point of operation on the Borghi Flagger machine was not guarded to prevent employees from getting their hands caught in the flagger during the operating cycle.      (b) Production Floor - On or about August 12, 2015, the Zahoransky Brush Tufting Machine was not guarded to prevent employees from getting their hands caught in the equipment during the operating cycle.
Recent events (2)
  • — I (S) $3100
  • — Z (S) $4900

1910.37 A03

Other-than-serious 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:  (a) Storage Area - On or about August 12, 2015 emergency exit doors were obstructed by a pallet of boxes.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1904.39 A02

Other-than-serious 1 instance 1 exposed
Issued
Penalty
Initial $700.00 · Current $500.00 Reduced
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours.     (a) Facility - On or about April 14, 2015 an employee was involved in a work-related accident which resulted in the amputation of the tips of two fingers.  The employer failed to report the incident to the Occupational Safety and Health Administration (OSHA) as required.
Recent events (2)
  • — I (O) $500
  • — Z (O) $700

1910.132 D01

Other-than-serious 1 instance 32 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE):  (a) Jobsite - On or about August 12, 2015, employees were performing machining related work tasks and using equipment including saws, drills, and sanders. The employer had did not conducted a hazard assessment to identify necessary ppe.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.178 L06

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  (a) Production Floor - On or about August 12, 2015 the employer did not have documentation to certify the forklift driver has been trained.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340844315.