Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: CHANNEL CONTROL MERCHANTS, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of CHANNEL CONTROL MERCHANTS, LLC in 6892 U.S. HWY 49 NORTH, HATTIESBURG, MS 39401 (NAICS 452990). OSHA activity number 340862614.

Watch Channel Control Merchants, LLC — free Get an email when a new federal OSHA severe-injury report for Channel Control Merchants, LLC is published. One employer, no account, unsubscribe in one click.
Site address
6892 U.S. HWY 49 NORTH
City
HATTIESBURG
State
MS
ZIP
39401
Mailing
P.O. BOX 711, HATTIESBURG, MS 39403
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
452990
Employees
350
Ownership type
A

7 citations on file for this inspection.

1910.141 A05

Serious Gravity 5 1 instance 350 exposed
Issued
Penalty
Initial $4000.00 · Current $2400.00 Reduced
29 CFR 1910.141(a)(5): Enclosed workplaces were not so constructed, equipped, and maintained as to prevent the entrance or harborage of rodents, insects, or other vermin:  (a) Facility - On or about August 19, 2015 there were holes on walls of the employee restrooms and wall of the storage area in processing room 10 which did not prevent the entrance of insects, vermin or rodents into the facility.
Recent events (2)
  • — I (S) $2400
  • — Z (S) $4000

1910.212 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $6000.00 · Current $3600.00 Reduced
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by ingoing nip points and rotating parts:  (a)  Target Room - On or about August 19, 2015, the idle rollers on the bottom of an elevated belt conveyor were not guarded to prevent contact with the in-running nip points.
Recent events (2)
  • — I (S) $3600
  • — Z (S) $6000

1910.305 B01 II

Serious Gravity 5 1 instance 18 exposed
Issued
Penalty
Initial $5000.00 · Current $3000.00 Reduced
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:  (a) Northside Receiving Near Split Team - On or about August 19, 2015 unused openings in the electrical panel were not covered.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $5000

1910.305 G01 IV A

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $5000.00 · Current $3000.00 Reduced
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  (a) Production Room 7 - On or about August 19, 2015 the flexible cord used to service a water cooler was used as a substitute for fixed wiring exposing employees to the hazard of electrical shock.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $5000

1910.305 G01 IV C

Serious Gravity 1 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(g)(1)(iv)(C): Flexible cords and cables were run through doorways, windows, or similar openings  (a) Production Room 7 - On or about August 19, 2015 the electrical cord being used to service a water cooler was extended over a doorway to the outlet in the adjoining room.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.22 A01

Other-than-serious 1 instance 350 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition.  (a) Facility - On or about August 19, 2015 there was insulation hanging from holes in the ceiling.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.303 G01

Other-than-serious 1 instance 18 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  (a) Processing Room 11 - On or about August 19, 2015 electrical panels were blocked and inaccessible for servicing and operation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View CHANNEL CONTROL MERCHANTS, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340862614.