Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MICHAEL P. BERNARDO STUCCO + STONE

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MICHAEL P. BERNARDO STUCCO + STONE in 86 LAZELLE ROAD, COLUMBUS, OH 43235 (NAICS 238140). OSHA activity number 340928423.

Watch Michael P. Bernardo Stucco + Stone — free Get an email when a new federal OSHA severe-injury report for Michael P. Bernardo Stucco + Stone is published. One employer, no account, unsubscribe in one click.
Site address
86 LAZELLE ROAD
City
COLUMBUS
State
OH
ZIP
43235
Mailing
5240 SMOTHERS ROAD, WESTERVILLE, OH 43081
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
8
Ownership type
A

3 citations on file for this inspection.

1926.300 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1700.00 · Current $850.00 Reduced
29 CFR 1926.300(b)(1): When power operated tools are designed to accommodate guards, they shall be equipped with such guards when in use.  a.  At the front of the building where a mortar mixer was used to sand and mortar mix to lay over walls, the top of the mixers was not properly guarded thereby exposing employees to a caught-in hazard.
Recent events (2)
  • — I (S) $850
  • — Z (S) $1700

1926.451 G04 XV

Other-than-serious 1 instance 3 exposed
Issued
Penalty
Initial $1700.00 · Current $0.00 Reduced
29 CFR 1926.451(g)(4)(xv): Crossbracing is acceptable in place of a midrail when the crossing point of two braces is between 20 inches (0.5 m) and 30 inches (0.8 m) above the work platform or as a toprail when the crossing point of two braces is between 38 inches (0.97 m) and 48 inches (1.3 m) above the work platform. The end points at each upright shall be no more than 48 inches (1.3 m) apart.    a.  At the front of the building where wire was put over the front of the building, the employer only had a cross brace on the back of the scaffold thereby exposing employees to a fall hazard.
Recent events (2)
  • — I (O) $0
  • — Z (S) $1700

1926.454 B

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1700.00 · Current $850.00 Reduced
29 CFR 1926.454(b): The employer shall have each employee who is involved in erecting, disassembling, moving, operating, repairing, maintaining, or inspecting a scaffold trained by a competent person to recognize any hazards associated with the work in question. The training shall include the following topics, as applicable:  29 CFR 1926.454(b)(2): The correct procedures for erecting, disassembling, moving, operating, repairing, inspecting, and maintaining the type of scaffold in question;  a.  On the site where tubular welded frame scaffold was inspected, erected and maintained, the employer did not provide scaffold training for employees thereby exposing employees to a fall hazard.
Recent events (2)
  • — I (S) $850
  • — Z (S) $1700

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340928423.