Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: HORACIO BECERRA

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of HORACIO BECERRA in 1316 TOWN CENTER DRIVE, PFLUGERVILLE, TX 78660 (NAICS 238160). OSHA activity number 340949171.

Watch Horacio Becerra — free Get an email when a new federal OSHA severe-injury report for Horacio Becerra is published. One employer, no account, unsubscribe in one click.
Establishment
HORACIO BECERRA
Site address
1316 TOWN CENTER DRIVE
City
PFLUGERVILLE
State
TX
ZIP
78660
Mailing
1302 ELMWOOD BOULEVARD, DALLAS, TX 75224
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
10
Ownership type
A

6 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $400.00 · Current $400.00
29 CFR 1903.19(c)(1) The employer did not certify to OSHA within 10 calendar days after the abatement date, that the cited violation had been abated:  a)  Citation 1 item 1a      Abatement Date 12/07/2015 a)  Citation 1 item 1b      Abatement Date 12/07/2015 a)  Citation 1 item 2        Abatement Date 12/07/2015 a)  Citation 1 item 3        Abatement Date 12/07/2015 a)  Citation 1 item 4        Abatement Date 12/18/2015
Recent events (1)
  • — Z (O) $400

1926.451 A06

Serious Gravity 5 2 instances 4 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $2000.00
29 CFR 1926.451(a)(6): Scaffolds were not constructed in accordance with the design by a qualified person.  On or about 25 September 2015, four employees were working from a job-site made wooden trash box on the forks of a rough terrain, telescoping boom forklift up to approximately 19 feet high without the employer ensuring that the platform was designed by a qualified person, exposing the employees to a fall hazard.
Recent events (1)
  • — Z (S) $2000

1926.454 A

Serious Gravity 5 2 instances 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.  On or about 25 September 2015, four employees were working from a job-site made wooden trash box on the forks of a rough terrain, telescoping boom forklift up to approximately 19 feet high without the employer ensuring that the workers were trained to identify the hazards of working from scaffolding, exposing the employees to a fall hazard.
Recent events (1)
  • — Z (S) $0

1926.451 C02 V

Serious Gravity 10 2 instances 4 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $2800.00
29 CFR 1926.451(c)(2)(v): The employer used forklifts to support scaffold platforms without ensuring that the entire platform was attached to the forks and that the forklift was not moved horizontally while the platform was occupied.  On or about 25 September 2015, four employees were working from a job-site made wooden trash box on the forks of a rough terrain, telescoping boom forklift up to approximately 19 feet high without the employer ensuring that the platform was attached to the forks, exposing the employees to a fall hazard.
Recent events (1)
  • — Z (S) $2800

1926.602 C01 II

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $1600.00
29 CFR 1926.602(c)(1)(ii): Modifications or additions which affect the capacity or safe operation of the equipment were made without the manufacturer's written approval.  On or about 25 September 2015, four employees were working from a job-site made wooden trash box on the forks of a rough terrain, telescoping boom forklift up to approximately 19 feet high without the employer ensuring that the platform was an approved attachment, exposing the operator and workers in the area to the hazard of being struck by the falling box. 1- The scaffold was found on the worksite by the employer 2- The scaffold was not designed by a qualified person 3- A decal stating to lift or lower personnel only in an approved work platform was located on the quick attach end of the boom head prior to lifting personnel. 4- A JLG decal was not installed on the quick attach end of the boom head prior to lifting personnel in a JLG supplied/approved personnel work platform.
Recent events (1)
  • — Z (S) $1600

1926.602 D

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $2000.00
29 CFR 1926.602(d): Powered industrial truck operator training.  Note: The requirements applicable to construction work under this paragraph are identical to those set forth at 1910.178(l) of this chapter.  29 CFR 1910.178(l)(1)(ii) Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer did not ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5).  On or about 25 September 2015, the employer did not ensure that the operators of the rough terrain forklift were trained in the safe operations of the forklift, exposing employees to hazards such as but not limited to being struck by moving objects, struck by falling loads and crushed by the forklift.
Recent events (1)
  • — Z (S) $2000

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340949171.