OSHA Inspection: WILSON-HURD MFG. CO.

Issued

2015-12-14 00:00:00

Abate by

2016-01-13 00:00:00

Penalty

Initial $4950.00 · Current $2475.00 Reduced

General-duty citation text

29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:     (a)  In the Fabrication Area; the Kenco (Model:  8-405, S/N:  GR113-1062) mechanical punch press #29 was not anchored to the floor to prevent walking or moving exposing employees to struck-by hazards.     (b)  In the Fabrication Area; the Johnson 45 (Press:  45 FW-PC, S/N:  68191) mechanical punch press #018 was not anchored to the floor to prevent walking or moving exposing employees to struck-by hazards.     (c)  In the Fabrication Area; the Johnson (Press:  45 FW-PC, S/N:  68190) mechanical punch press #020 was not anchored to the floor to prevent walking or moving exposing employees to struck-by hazards.

Issued

2015-12-14 00:00:00

Abate by

2016-02-04 00:00:00

Penalty

Initial $24750.00 · Current $12375.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:    (a)  The employer did not conduct periodic inspections of the energy control procedures to ensure an accurate procedure and employees were familiar with their responsibilities under the procedures.    Wilson-Hurd Manufacturing Co. was previously cited for a violation of this Occupational Safety and Health Standard (29 CFR 1910.147(c)(6)(i)), which was contained in OSHA inspection number 315288605, citation number 01, item number 002 and was affirmed as a final order on October 20, 2011, with respect to a workplace located at 202 South Johnson St., Berlin, Wisconsin.    Wilson-Hurd Manufacturing Co. was previously cited for a violation of this Occupational Safety and Health Standard (29 CFR 1910.147(c)(6)(i)), which was contained in OSHA inspection number 943165, citation number 02, item number 001 and was affirmed as a final order on November 13, 2013, with respect to a workplace located at 202 South Johnson St., Berlin, Wisconsin.

Issued

2015-12-14 00:00:00

Penalty

Initial $13860.00 · Current $6930.00 Reduced

General-duty citation text

29 CFR 1910.217(c)(2)(i)(a): Point of operation guard(s) on mechanical power press(es) did not prevent entry of hands or fingers into the point of operation by reaching through, over, under or around the guard(s):    (a)  On or about September 22, 2015; in the Fabrication Area; the Kenco mechanical punch press #29 (Model:  8-405, S/N: GR113-1062) used as a serial number machine had the point of operation guarding which allowed access under the guard and on both sides exposing employees to struck-by hazards.      Wilson-Hurd Manufacturing Co. was previously cited for a violation of this Occupational Safety and Health Standard (29 CFR 1910.217(c)(2)(i)(a)), which was contained in OSHA inspection number 315288605, citation number 01, item number 003 and was affirmed as a final order on October 20, 2011, with respect to a workplace located at 202 South Johnson St., Berlin, Wisconsin.