Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: SOUTHERN CONSTRUCTION AND DEVELOPMENT

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SOUTHERN CONSTRUCTION AND DEVELOPMENT in 4520 I55 NORTH, JACKSON, MS 39213 (NAICS 238130). OSHA activity number 340975630.

Watch Southern Construction AND Development — free Get an email when a new federal OSHA severe-injury report for Southern Construction AND Development is published. One employer, no account, unsubscribe in one click.
Site address
4520 I55 NORTH
City
JACKSON
State
MS
ZIP
39213
Mailing
691 LAVELL LADNER RD, LUMBERTON, MS 39455
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
8
Ownership type
A

3 citations on file for this inspection.

1926.102 A01

Serious Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $2520.00 · Current $2520.00
29 CFR 1926.102(a)(1): Employees shall be provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents.  (a) Roof - On or about October 8, 2015 an employee was exposed to permanent eye injuries while operating a nail gun without wearing eye protection.
Recent events (1)
  • — Z (S) $2520

1926.453 B02 V

Serious Gravity 10 2 instances 2 exposed
Issued
Penalty
Initial $2520.00 · Current $2520.00
29 CFR 1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift:Note:  As of January 1, 1998, subpart M of this part (1926.502(d)) provides that body belts are not acceptable as part of a personal fall arrest system.  The use of a body belt in a tethering system or in a restraint system is acceptable and is regulated  (a) North Side of Building - On or about October 8, 2015 two employees were exposed to a fall hazard while working in a Genie S45 Boom Lift (serial no. 863113).  Employees were elevated 12 feet 6 inches above concrete without fall protection.
Recent events (1)
  • — Z (S) $2520

1926.501 B10

Serious Gravity 10 3 instances 3 exposed
Issued
Abate by
Penalty
Initial $2520.00 · Current $2520.00
29 CFR 1926.501(b)(10): "Roofing work on Low-slope roofs." Except as otherwise provided in paragraph (b) of this section, each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width (see Appendix A to subpart M of this part), the use of a safety monitoring system alone [i.e. without the warning line system] is permitted.  (a)   Roof of Building - On or about October 8, 2015 two employees were exposed to a fall hazard while working on low-slope roof 12 feet 6 inches above concrete without fall protection.    (b)  Roof of Building - On or about October 8, 2015 an employee was exposed to a fall hazard while accessing a low-slope roof 12 feet 6 inches above concrete without fall protection. Employee used a Genie S45 Boom Lift (serial no. 863113) to access and exit the roof.
Recent events (1)
  • — Z (S) $2520

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340975630.