OSHA Inspection: JUAN PEREZ TAPIA

Issued

2015-11-03 00:00:00

Penalty

Initial $2800.00 · Current $1680.00 Reduced

General-duty citation text

29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports:     (a) Front side, new residential construction located at 4331 Bryson Court, Powder Springs, GA 30127: Employees were exposed to fall hazards while engaged in masonry work on a tubular welded scaffold platform which was not fully planked. Employees were exposed to falls of approximately 12-feet, 1-inch to the lower level.

Issued

2015-11-03 00:00:00

Penalty

Initial $2800.00 · Current $1680.00 Reduced

General-duty citation text

29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level:    (a) Front side, new residential construction located at 4331 Bryson Court, Powder Springs, GA 30127: Employees were exposed to fall hazards of approximately 12-feet, 1-inch to the lower level while installing bricks on a tubular welded scaffold platform in which a fall protection system was not provided.

Issued

2015-11-03 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.403(b)(1): Employer did not ensure that electrical equipment is free from recognized hazards that are likely to cause death or serious physical harm to employees:  (a) Front side, new residential construction located at 4331 Bryson Court, Powder Springs, GA 30127: The employer failed to inspect all of the electrical cords prior to the start of the work shift. A 50 ft. flexible cord used to power a Makita (Model 5007F) 7-1/4-inch Circular Saw had a torn outer casing, missing strain relief, and a missing ground pin and was not removed from service.