OSHA Inspection: JET MACHINING AND DESIGN, INC.

Issued

2015-12-15 00:00:00

Abate by

2015-12-21 00:00:00

Penalty

Initial $1600.00 · Current $960.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(4): Revolving drum(s), barrel(s), or container(s) were not guarded by enclosure(s) which were interlocked with the drive mechanism so that the barrel(s), drum(s), or container(s) could not revolve unless the enclosure(s) were in place:    a) On or about 10/21/2015 at building #409 in the manufacturing area, the CNC MIL and Lathe machines such as, but not limited to the Super KiaTurn 21, ser.# 1446 and Hurco VMX24 CNC MIL machine ser.# M242-06007091AFA were found with the Interlocking safety devices missing and/or disconnected exposing employees to a struck-by hazard.

Issued

2015-12-15 00:00:00

Abate by

2016-01-12 00:00:00

Penalty

Initial $1200.00 · Current $720.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work:    a) On or about Oct 21, 2015 in building 409, at building 409, in the manufacture area the abrasive wheels work rests for the Craftsman 1/3 H.P. and Clarke metalwork bench grinders were not kept adjusted to within 1/8 inch, exposing employee to a struck-by hazard.

Issued

2015-12-15 00:00:00

Abate by

2016-01-12 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel:   a) On or about 10/21/2015 at building 409, in the manufacture area the abrasive wheels adjustable tongue guards for the Craftsman 1/3 H.P. and Clarke 8" metalwork bench grinders were missing exposing employee to a struck-by hazard.

Issued

2015-12-15 00:00:00

Abate by

2016-01-12 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:    a) On or about 10/21/2015 at the machine shop area, portable extension cords/power strips were used to power equipment such as, but not limited to; light lamps, two bench grinders and display monitors exposing employees to an electrical hazard.