OSHA Inspection: CHARLES P. & CAROL V. MCBRIDE

Issued

2016-04-20 00:00:00

Abate by

2016-05-16 00:00:00

Penalty

Initial $4900.00 · Current $2800.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:    (a) In the production area, the employer did not establish a lockout/tag out program consisting of energy control procedures, employee training, and periodic inspections, exposing the employees to electrical and amputation hazards. The employees were required to service and maintain equipment such as, but not limited to, printing presses, flat bed cutters, die cutters, and folders.

Issued

2016-04-20 00:00:00

Abate by

2016-05-02 00:00:00

Penalty

Initial $2800.00 · Current $1500.00 Reduced

General-duty citation text

29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:    (a) In the printing press room, on the feeder side of Printing Press CD74, sufficient access and clearance was not provided for electrical service panels, exposing the employees to electrical and trip hazards.

Issued

2016-04-20 00:00:00

Abate by

2016-05-02 00:00:00

Penalty

Initial $3500.00 · Current $1700.00 Reduced

General-duty citation text

29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:    (a) In the printing press room, on the feeder side of Printing Press CD74, unused openings in electrical boxes were not effectively closed, exposing employees to an electrical hazard.