Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JOHN'S COLLISION REPAIR, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of JOHN'S COLLISION REPAIR, INC. in 4010 S FEDERAL BLVD., SHERIDAN, CO 80110 (NAICS 811111). OSHA activity number 341104230.

Watch John'S Collision Repair, INC. — free Get an email when a new federal OSHA severe-injury report for John'S Collision Repair, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4010 S FEDERAL BLVD.
City
SHERIDAN
State
CO
ZIP
80110
Mailing
4010 S FEDERAL BLVD., SHERIDAN, CO 80110
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811111
Employees
17
Ownership type
A

4 citations on file for this inspection.

1910.134 D03 III B 2

Serious Gravity 1 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $1200.00 · Current $720.00 Reduced
29 CFR 1910.134(d)(3)(iii)(B)(2):  The employer did not implement a change schedule for respirators not equipped with an ESLI that would ensure cartridges were changed before the end of their service life:     a)  On or about December 8, 2015, and at times prior, the employer did not protect employees that used half-face air purifying respirators while spray-applying coatings containing isocyanates and other hazardous chemicals by developing and implementing a cartridge change schedule to prevent breakthrough of the organic vapor cartridges used with the respirators.  Abatement Note:  Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $720
  • — Z (S) $1200

1910.134 E01

Serious Gravity 1 1 instance 8 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(e)(1):  The employer did not provide a medical evaluation to determine the employees ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:    a)  On or about December 8, 2015, and at times prior, paint department employees wore half-face elastomeric respirators without first being medically evaluated to ensure that they were physically fit to wear the respirator.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.303 G01

Other-than-serious 1 instance 17 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  (a)  On or about December 8, 2015, the employer did not maintain a clear distance of 3 feet in front of the circuit breaker panels and transformers in order to permit safe operation and maintenance of equipment.    Abatement Note: Abatement certification is not required for this item.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 17 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  (a) On or about December 8, 2015, and at times prior, the employer did not ensure employees, who were required to engage in painting operations using hardening additives which contain hazardous chemicals including, but not limited to, hexamethylene diisocyanate, xylene, and ethylbenzene were not provided effective hazard communication information and training.    Abatement Note:  Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View JOHN'S COLLISION REPAIR, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341104230.