OSHA Inspection: EXACT MANUFACTURING, LLC.

Issued

2016-03-22 00:00:00

Abate by

2016-04-22 00:00:00

Penalty

Initial $1200.00 · Current $720.00 Reduced

General-duty citation text

29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit":    (a) Machine shop area; the exit doors from the machining area were not marked with signs reading "Exit".

Issued

2016-03-22 00:00:00

Abate by

2016-04-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.106(e)(9)(iii): Combustible waste material and residues in a building or unit operating area were not kept to a minimum, stored in covered metal receptacles and disposed of daily:    (a) Machine shop area; shop towels that were saturated with oils and solvents were stored in open metal containers or a cloth hamper.

Issued

2016-03-22 00:00:00

Abate by

2016-06-17 00:00:00

Penalty

Initial $2000.00 · Current $1200.00 Reduced

General-duty citation text

29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s):    (a) Machine shop area; the electrical and pneumatic energy sources were not disconnected while the machine operators performed servicing tasks including, but not limited to tooling changes, setup, clearing jams and cleaning activities on production machinery such as, but not limited to the Acme-Gridley and Brown and Sharps metal milling machines.

Issued

2016-03-22 00:00:00

Abate by

2016-06-17 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:    (a) Machine shop area; locks were not applied to the electrical and pneumatic energy source disconnects while the machine operators performed servicing tasks including, but not limited to, tooling changes, setup, clearing jams and cleaning activities on production machinery such as, but not limited to, the Acme-Gridley and Brown and Sharps metal milling machines.

Issued

2016-03-22 00:00:00

Abate by

2016-04-12 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  (a) Exact Manufacturing, LLC receiving and machining area; the employer did not conduct a performance evaluation of the forklift operators in the last three years.