Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: ECUA BUILDERS, INC.

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of ECUA BUILDERS, INC. in 4126 CONWAY VALLEY ROAD, ATLANTA, GA 30327 (NAICS 238130). OSHA activity number 341250355.

Watch Ecua Builders, INC. — free Get an email when a new federal OSHA severe-injury report for Ecua Builders, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
ECUA BUILDERS, INC.
Site address
4126 CONWAY VALLEY ROAD
City
ATLANTA
State
GA
ZIP
30327
Mailing
1231 OAK ARBOUR AVENUE, LAWRENCEVILLE, GA 30044
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
8
Ownership type
A

5 citations on file for this inspection.

1926.304 D

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $2800.00 · Current $1680.00 Reduced
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe:    (a) Second floor, new residential construction located at 4126 Conway Valley Road, Atlanta, GA 30327: Employees were exposed to severe laceration and amputation hazards while operating a Makita (Model -5007NB) 7-1/4-inch Circular Saw without an operating lower guard as a wood shim was used to keep the lower guard in a fixed open position.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2800

1926.403 B02

Serious Gravity 1 1 instance 1 exposed
Issued
Penalty
Initial $1200.00 · Current $720.00 Reduced
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification:    (a) Second floor, new residential construction located at 4126 Conway Valley Road, Atlanta, GA 30327: Employees were exposed to electrical shock hazards while using an electrical junction box which was connected to a flexible cord and used as a makeshift power outlet. The junction box used is intended for indoor use and is manufactured to be fixed to a support within a structure.
Recent events (2)
  • — I (S) $720
  • — Z (S) $1200

1926.405 B02

Serious Gravity 1 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.405(b)(2): All pull boxes, junction boxes, and fittings were not provided with covers:  (a) Second floor, new residential construction located at 4126 Conway Valley Road, Atlanta, GA 30327: Employee was exposed to electrical shock hazards while using an energized junction box which was not provided with a cover over the outlet.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 G01 VII

Serious Gravity 10 1 instance 2 exposed
Issued
Penalty
Initial $2800.00 · Current $1680.00 Reduced
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section:    (a) Second floor, new residential construction located at 4126 Conway Valley Road, Atlanta, GA 30327: Employees were exposed to fall hazards of approximately 15-feet, 8-inches to the concrete surface below while working on a makeshift scaffold with no fall protection system in place.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2800

1926.403 B01

Other-than-serious 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $400.00 · Current $240.00 Reduced
29 CFR 1926.403(b)(1): Employer did not ensure that electrical equipment is free from recognized hazards that are likely to cause death or serious physical harm to employees:    (a) New residential construction located at 4126 Conway Valley Road, Atlanta, GA 30327: The employer failed to inspect all of the electrical cords prior to the start of the work shift. Multiple extension cords were missing ground pins, strain relief and had torn outer protective casings and were not removed from service or repaired.
Recent events (2)
  • — I (O) $240
  • — Z (O) $400

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341250355.