Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: WOJCIECH SZCZERSKI DBA EXTER-TECH CONSTRUCTION, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of WOJCIECH SZCZERSKI DBA EXTER-TECH CONSTRUCTION, INC. in 2210 OAK AVE., NORTHBROOK, IL 60062 (NAICS 238350). OSHA activity number 341255370.

Watch Wojciech Szczerski DBA Exter-Tech Construction, INC. — free Get an email when a new federal OSHA severe-injury report for Wojciech Szczerski DBA Exter-Tech Construction, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2210 OAK AVE.
City
NORTHBROOK
State
IL
ZIP
60062
Mailing
9368 BAY COLONY DR. #2S, DES PLAINES, IL 60018
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238350
Employees
4
Ownership type
A

6 citations on file for this inspection.

1926.102 A01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $2800.00
29 CFR 1926.102(a)(1):  Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:    a) On February 17, 2016, employees were required to use a Ryobi table saw to cut plywood and were observed not wearing eye protection.
Recent events (3)
  • — A (S) $2800
  • — I (S) $1400
  • — Z (S) $2800

1926.304 F

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $2400.00 · Current $2400.00
29 CFR 1926.304(f): Sections 4.1.2 (c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f) circular handfed rip saws did not have non-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator:    a) On February 17, 2016, the employer provided for employee use a Ryobi table saw that was not equipped with non-kickback fingers or dogs to rip lumber.
Recent events (3)
  • — A (S) $2400
  • — I (S) $1200
  • — Z (S) $2400

1926.304 I01

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
23 CFR 1926.304(i)(1):  Each circular hand-fed ripsaw was not guarded by a hood completely enclosing the portion of the saw above the table and the portion of the saw above the material being cut.  a)  On February 17, 2016, the employer provided for employee use a Ryobi table saw that was not equipped with a blade guard to rip lumber.
Recent events (3)
  • — A (S) $0
  • — I (S) $0
  • — Z (S) $0

1926.416 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $1600.00 · Current $1600.00
29 CFR 1926.416(e)(1):  Worn or frayed electric cords or cables were used:     a)   On February 17, 2016, employees were using a Ryobi table saw that had a worn and frayed power cord.
Recent events (3)
  • — A (S) $1600
  • — I (S) $800
  • — Z (S) $1600

1926.501 B13

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $2800.00 · Current $2800.00
29 CFR 1926.501(b)(13):  Each employee engaged in residential construction activities 6 feet or more above lower levels was not protected by guardrail systems, safety net systems, or personal fall arrest systems, nor were the employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):      a) On February 17, 2016, employees were exposed to fall hazards of up to approximately 9.8 feet to the asphalt driveway below, while performing carpentry work to an existing single family house.
Recent events (3)
  • — A (S) $2800
  • — I (S) $1400
  • — Z (S) $2800

1926.1053 B04

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $2800.00 · Current $2800.00
29 CFR 1926.1053(b)(4):  Ladder(s) were used for purposes other than the purpose for which they were designed:    a)  On February 17, 2016, employees were exposed to fall hazards while using an A-frame ladder in the closed position on the roof of an existing single family house approximately 9.8 feet high.
Recent events (3)
  • — A (S) $2800
  • — I (S) $1400
  • — Z (S) $2800

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341255370.