Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: SENTINEL CONTROL TECHNOLOGIES, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SENTINEL CONTROL TECHNOLOGIES, INC. in 4234 W. MAIN ST., GRAY, LA 70359 (NAICS 541330). OSHA activity number 341262798.

Watch Sentinel Control Technologies, INC. — free Get an email when a new federal OSHA severe-injury report for Sentinel Control Technologies, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4234 W. MAIN ST.
City
GRAY
State
LA
ZIP
70359
Mailing
4234 W. MAIN ST., GRAY, LA 70359
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
541330
Employees
8
Ownership type
A

5 citations on file for this inspection.

1910.212 A03 II

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1575.00 · Current $1575.00
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):   a) Machine Shop; On or about February 19, 2016 the employer allowed an employee to operate a Porter Cable Drill Press without a guard around the bit.
Recent events (2)
  • — I (S) $1575
  • — Z (S) $1575

1910.212 B

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1575.00 · Current $0.00 Reduced
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:      a) Machine Shop; On or about February 19, 2016, the employer allowed employees to use a Porter Cable Drill Press that was not anchored down or secured from moving about.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1575

1910.304 F01 IV

Serious Gravity 5 2 instances 1 exposed
Issued
Abate by
Penalty
Initial $2100.00 · Current $1050.00 Reduced
29 CFR 1910.304(f)(1)(iv): Overcurrent devices for circuits rated 600 volts, nominal, or less, were located in the vicinity of easily ignitable material:      a) Shipping Area; On or about February 19, 2016, electrical panels were blocked by palletized storage material and equipment.    b) Shipping Area; On or about February 19, 2016, a transformer was covered with cardboard and was blocked by palletized storage material and equipment. The cardboard presents overheating and fire hazards.
Recent events (2)
  • — I (S) $1050
  • — Z (S) $2100

1910.305 B01 II

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1575.00 · Current $0.00 Reduced
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:      a) Shipping Area; On or about February 19, 2016, the employer allowed employees to access an electrical panel that had open circuit spaces.
Recent events (2)
  • — I (O) $0
  • — Z (S) $1575

1910.1200 G01

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet for each hazardous chemical which they used:    a) Shipping Area; On or about February 19, 2016, safety data sheets were not readily available for chemicals found in the shipping area such as but not limited to hydraulic oil.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

OXYCHEM

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341262798.