Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: GRIFFIN FAST LUBE

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of GRIFFIN FAST LUBE in 4075 N ACADEMY, COLORADO SPRINGS, CO 80917 (NAICS 811191). OSHA activity number 341323889.

Watch Griffin Fast Lube — free Get an email when a new federal OSHA severe-injury report for Griffin Fast Lube is published. One employer, no account, unsubscribe in one click.
Establishment
GRIFFIN FAST LUBE
Site address
4075 N ACADEMY
City
COLORADO SPRINGS
State
CO
ZIP
80917
Mailing
1725 E 1450 S SUITE 250, CLEARFIELD, UT 84015
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811191
Employees
7
Ownership type
A

5 citations on file for this inspection.

1910.22 A02

Serious Gravity 5 1 instance 7 exposed
Issued
Abate by
Penalty
Initial $5000.00 · Current $3000.00 Reduced
29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained in a clean and, so far as possible, a dry condition:    a)  On or about March 15, 2016, and at times prior, employees were exposed to slips and falls due to oil on the floor throughout the automotive pit area.    Abatement Note:  Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $3000
  • — Z (S) $5000

1910.106 E09 I

Serious Gravity 5 2 instances 7 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.106(e)(9)(i): Maintenance and operating practices did not control leakage and prevent accidental escape of flammable liquids:    a)  On or about March 15, 2016, and at times prior, employees were exposed to slips and falls due to oil on the floor throughout the automotive pit area due to a leak from the automotive oil waste tank in bay 1.    b)  On or about March 15, 2016, and at times prior, employees were exposed to slips and falls due to oil on the floor throughout the automotive pit area due to an oil leak in the connecting hose in bay 5.      Abatement Note:  Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.106 E09 III

Serious Gravity 5 2 instances 7 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.106(e)(9)(iii): Combustible waste material and residues in a building or unit operating area were not kept to a minimum, stored in covered metal receptacles and disposed of daily:  a)  On or about March 15, 2016, the employer exposed employees to fire hazards in that combustible oily rags were kept in a plastic bag rather than a covered metal receptacle and were not disposed of on a daily basis.  b)  On or about March 15, 2016, the employer exposed employees to fire hazards in that combustible oily rags were left on the floor of the pit area to collect leaking oil from the waste oil tank in pit 1 and a leak from the connecting hose in pit 5.  Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.37 A03

Other-than-serious 3 instances 7 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:  a)  On or about March 15, 2016, the employer exposed employees to a fire hazards, due to not ensuring the emergency exit, located on the South side of the automotive bay area, was free of obstructions.  b)  On or about March 15, 2016, the employer exposed employees to a fire hazards, due to not ensuring the emergency exit, located on the North East side of the automotive bay area, was free of obstructions.  c)  On or about March 15, 2016, the employer exposed employees to a fire hazards, due to not ensuring the emergency exit, located in the employee room, was free of obstructions.  Abatement Note: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.303 G01

Other-than-serious 1 instance 7 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  a)  On or about March 15, 2016, the employer did not maintain a clear distance of 3 feet in front of the circuit breaker panels and transformers in order to permit safe operation and maintenance of equipment.     Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View GRIFFIN FAST LUBE's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341323889.