Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: EXTOL OF OHIO, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of EXTOL OF OHIO, INC. in 208 REPUBLIC ST., NORWALK, OH 44857 (NAICS 423330). OSHA activity number 341334001.

Watch Extol OF Ohio, INC. — free Get an email when a new federal OSHA severe-injury report for Extol OF Ohio, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
EXTOL OF OHIO, INC.
Site address
208 REPUBLIC ST.
City
NORWALK
State
OH
ZIP
44857
Mailing
208 REPUBLIC ST., NORWALK, OH 44857
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423330
Employees
58
Ownership type
A

4 citations on file for this inspection.

1910.134 A02

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3500.00 · Current $1750.00 Reduced

Hazardous substances 9135

29 CFR 1910.134(a)(2): A respirator was not provided by the employer to each employee when such equipment was necessary to protect the health of the employee:        1.) On or about February 24, 2016 the employer did not supply a respirator to an employee who required it to protect their health.  An employee working in the CNC Mill area was overexposed to particulates not otherwise regulated (PNOR) total dust at an 8 hour time weighted average of 17.0 mg/m3, which exceeded the OSHA permissible exposure limit of 15 mg/m3 by 113%.
Recent events (2)
  • — I (S) $1750
  • — Z (S) $3500

1910.1000 C

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 9135

29 CFR 1910.1000(c): An employee(s) was exposed to particulates not otherwise regulated (total dust) in excess of the 8-hour time weighted average limits of 15 mg/m3  listed in Table Z-3:      1.) On or about February 24, 2016 an employee working in the CNC Mill area was overexposed to particulates not otherwise regulated (PNOR) total dust at an 8 hour time weighted average of 17.0 mg/m3, which exceeded the OSHA permissible exposure limit of 15 mg/m3 by 113%.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1000 E

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 9135

29 CFR 1910.1000(e): Feasible administrative or engineering controls were not determined and implemented to achieve compliance with the limits prescribed in 29 CFR 1910.1000(a) through (d):        1.) On or about February 24, 2016 the employer failed to implement adequate engineering and/or administrative controls to reduce employee's exposure to particulates not otherwise regulated (PNOR) total dust.  An employee working in the CNC Mill area was overexposed to particulates not otherwise regulated (PNOR) total dust at an 8 hour time weighted average of 17.0 mg/m3, which exceeded the OSHA permissible exposure limit of 15 mg/m3 by 113%.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 K06

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 9135

29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:    1.) On or about March 18, 2016 the employer failed to provide Appendix D of the respiratory protection standard to employees who wore filtering face piece respirators (dust masks) voluntarily.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View EXTOL OF OHIO, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341334001.