Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: ODERCO INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ODERCO INC. in 3810 BEAUMONT RD., LIBERTY, TX 77575 (NAICS 333132). OSHA activity number 341412849.

Watch Oderco INC. — free Get an email when a new federal OSHA severe-injury report for Oderco INC. is published. One employer, no account, unsubscribe in one click.
Establishment
ODERCO INC.
Site address
3810 BEAUMONT RD.
City
LIBERTY
State
TX
ZIP
77575
Mailing
3810 BEAUMONT RD., LIBERTY, TX 77575
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333132
Employees
23
Ownership type
A

4 citations on file for this inspection.

1910.253 B04 III

Serious Gravity 5 1 instance 23 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1200.00 Reduced
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least 1 half hour.    On or about April 20, 2016 at the facility where employees were exposed to a fire hazard when acetylene cylinders were stored with oxygen cylinders without being separated by a minimum distance of 20 feet or by a noncombustible barrier at least 5 feet high.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2000

1910.303 F02

Serious Gravity 5 2 instances 23 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1200.00 Reduced
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:   On or about April 20, 2016 at the facility where two breaker boxes were not labeled to identify each breaker and or switch.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2000

1910.303 G02 I

Serious Gravity 5 2 instances 23 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $1200.00 Reduced
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating  at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i):  On or about April 20, 2016 at the facility in the back shop area where employees were exposed to electrical hazards when using an electrical wall outlet and a breaker panel that did not have approved covers.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2000

1910.303 B02

Other-than-serious 2 instances 23 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling.    On or about April 20, 2016 at the facility where employees were using a metal electrical box with 2 duplex receptacles that were not used in accordance with instructions in the listing or labeling.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341412849.