OSHA Inspection: TIGER EXPRESS CAR WASH

Issued

2016-06-22 00:00:00

Abate by

2016-08-09 00:00:00

Penalty

Initial $3600.00 · Current $1800.00 Reduced

General-duty citation text

29 CFR 1910.132(f)(1): The employer did not provide training to each employee who is required by this section to use personal protective equipment:  The employer is failing to protect employees from chemical hazards.  The condition was most recently observed at 2 Merlin Drive, Troy, MO  63379 when the employer failed to adequately train employees who are required to wear protective eye or face protection to prevent splashes by corrosive chemicals.

Issued

2016-06-22 00:00:00

Abate by

2016-08-09 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:  The employer is failing to protect employees from chemical hazards.  The condition was most recently observed at 2 Merlin Drive, Troy, MO  63379 when the employer failed to ensure employee use of eye or face protection when exposed to corrosive chemicals.

Issued

2016-06-22 00:00:00

Abate by

2016-07-19 00:00:00

Penalty

Initial $4500.00 · Current $2250.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  The employer failed to protect employees from in-running nip points.  The most recent occurrence was observed a 2 Merlin Drive, Troy, MO  63379 when the belt and pulley drives of the Wanner Engineering, Inc. Hydra-Cell pumps were not guarded.

Issued

2016-06-22 00:00:00

Abate by

2016-07-19 00:00:00

Penalty

Initial $4500.00 · Current $2250.00 Reduced

General-duty citation text

29 CFR 1910.303(c)(3)(i): All splices and joints and the free ends of the conductors were not covered with an insulation equivalent to that of the conductors or with an insulating device identified for the purpose:   The employer failed to protect employees from electrical hazards.  This condition was most recently observed at 2 Merlin Drive, Troy, MO  63379 where an energized 208 VAC electrical conductor was observed extruding from a junction box without an insulating device.  Employees are exposed to the electrical shock hazard when operating the UniMac Car Wash Laundry Machine.

Issued

2016-06-22 00:00:00

Abate by

2016-07-19 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose:  The employer failed to protect employees from electrical hazards.  This condition was most recently observed at 2 Merlin Drive, Troy, MO  63379 where energized electrical wires were observed extruding from a junction box that was missing the cover.  Employees are exposed to the electrical shock hazard when operating the UniMac Car Wash Laundry Machine.