OSHA Inspection: LOOKOUT METALS, LLC

Issued

2016-07-01 00:00:00

Abate by

2016-07-08 00:00:00

Penalty

Initial $1600.00 · Current $960.00 Reduced

General-duty citation text

29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:   Sheet Metal, Shop South wall, On or about June 03/2016, employees were exposed to fall hazards, while climbing up to the storage platform, which was not provided with a guardrail close to the opening of the stairway.

Issued

2016-07-01 00:00:00

Abate by

2016-07-08 00:00:00

Penalty

Initial $1600.00 · Current $960.00 Reduced

General-duty citation text

29 CFR 1910.23(d)(1)(iii): Stairway(s) less than 44 inches wide having both sides open, did not have one stair railing on each side:  Sheet Metal Shop, South wall, On or about June 03, 2016, employees were exposed to fall hazards, when climbing the stairway less than 44 inches wide without a hand rail on the left side.

Issued

2016-07-01 00:00:00

Abate by

2016-07-08 00:00:00

Penalty

Initial $2400.00 · Current $1440.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  Sheet Metal Shop, On or about June 03, 2016, employees were exposed to caught-in hazards when working close to a Campbell Hausfeld air receiver, which was not provided with a guard covering the pulley.

Issued

2016-07-01 00:00:00

Abate by

2016-07-08 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(e)(2)(i): Overhead horizontal belt(s) with lower parts seven -7 feet or less from the floor(s) or platform(s) were not guarded on the sides and bottom in accordance with the requirements specified at CFR 1910.219(o)(3):  Sheet Metal Shop, On or about June 03, 2016, employees were exposed to caught-in hazards when working close to a Campbell-Hausfeld air receiver model #DP5810-Q, which was not provided with a guard covering the belt.

Issued

2016-07-01 00:00:00

Abate by

2016-07-08 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly:  Sheet Metal Shop, On or about June 3, 2016, employees were exposed to fire hazards, when four fire extinguishers were found to have been last inspected on June 2011.