OSHA Inspection: SUPERIOR AUTOMOTIVE & RV REPAIR

Issued

2016-07-13 00:00:00

Abate by

2016-08-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(h)(3)(iv):   The details of the hazard communication program developed by the employer, did not include an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information:   (a) On or about June 10, 2016, the employer did not train employees on the hazard communication program use by their employer to access the safety data sheets.    Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").

Issued

2016-07-13 00:00:00

Abate by

2016-08-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws:  a) On or about June 29, 2016, and at times prior, the employees were exposed to electrical hazards in the shop area  while operating the parts wash machine where as the cord connected to the electrical junction did not have adequate strain relief.      Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").

Issued

2016-07-13 00:00:00

Abate by

2016-08-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:  (a) On or about June 10, 2016, the employer exposed employees to stuck-by and caught-in hazards due to the bench grinders missing the work rest and not being adjusted to one eight inch.   Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").

Issued

2016-07-13 00:00:00

Abate by

2016-08-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(a)(3): Grinding machine(s) were not equipped with flanges in accordance with 29 CFR 1910.215(c):  (a) On or about June 10, 2016, the employer exposed employees to stuck-by hazards due to the bench grinders, located in the shop area was missing outer flange.   Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").

Issued

2016-07-13 00:00:00

Abate by

2016-08-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:   (a) On or about June 10, 2016, the employer exposed employees to stuck-by and caught-in hazards due to the bench grinders missing the tongue guards and not being adjusted to one fourth inch.   Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").

Issued

2016-07-13 00:00:00

Abate by

2016-08-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  a) On or about June 10, 2016, the employer did not maintain a clear distance 3 feet in front of the circuit breaker panels in that the electrical panels were not accessible preventing emergency shutdown, electrical repairs and maintenance.    Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").