Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MEMORIAL MONUMENTS & VAULTS

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of MEMORIAL MONUMENTS & VAULTS in 1609 S 5TH, POCATELLO, ID 83201 (NAICS 453998). OSHA activity number 341557957.

Watch Memorial Monuments & Vaults — free Get an email when a new federal OSHA severe-injury report for Memorial Monuments & Vaults is published. One employer, no account, unsubscribe in one click.
Site address
1609 S 5TH
City
POCATELLO
State
ID
ZIP
83201
Mailing
1609 S 5TH, POCATELLO, ID 83201
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
453998
Employees
50
Ownership type
A

4 citations on file for this inspection.

1910.106 E06 II

Serious Gravity 1 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $1785.00 · Current $893.00 Reduced
29 CFR 1910.106(e)(6)(ii): Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), was dispensed into containers unless the nozzle and container are electrically interconnected.   (a) In the vault area: On and before May 13, 2016 55-gallon drums of Quick Drying Bronze Fluid with a flash point of 50 degrees Fahrenheit were not grounded or bonded.   Note: Abatement certification is required for this item.
Recent events (2)
  • — I (S) $892.5
  • — Z (S) $1785

1910.215 A04

Serious Gravity 1 1 instance 4 exposed
Issued
Penalty
Initial $1785.00 · Current $893.00 Reduced
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:  (a)  In main prep area: On and before May 13, 2016 grinders used to sharpen tools did not have work rest guards.   Note: Abatement certification is required for this item.
Recent events (2)
  • — I (S) $892.5
  • — Z (S) $1785

1910.215 B09

Serious Gravity 1 1 instance 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  (a)  In main prep area: On and before May 13, 2016 grinders used to sharpen tools did not have tongue guards.   Note: Abatement certification is required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.37 A03

Other-than-serious 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.37(a)(3): Exit routes were not kept free and unobstructed.  Materials or equipment were placed, either permanently or temporarily, within the exit route.  (a) South East door of blast area: On and before May 13, 2016 tools and materials blocked employee access to exit door.   (b) Route between blast area and prep area: On and before May 13, 2016 headstones blocked  employee access to exits.   Note: Abatement certification is required for this item.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341557957.