Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: WILLIAM YOUNG EXCAVATING/SITE WORK LLC

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of WILLIAM YOUNG EXCAVATING/SITE WORK LLC in 12 SUNSET AVE, CONCORD, NH 03301 (NAICS 238910). OSHA activity number 341708956.

Watch William Young Excavating/Site Work LLC — free Get an email when a new federal OSHA severe-injury report for William Young Excavating/Site Work LLC is published. One employer, no account, unsubscribe in one click.
Site address
12 SUNSET AVE
City
CONCORD
State
NH
ZIP
03301
Mailing
P.O. BOX 863, EPSOM, NH 03234
Inspection type
Federal Agency (M)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238910
Employees
10
Ownership type
A

5 citations on file for this inspection.

1926.20 B02

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $3803.00
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):  (a) Jobsite - The employer did not have a competent person inspect the Kabota SVL90-2 Compact Track Loader to ensure it was operating safely, additionally, the employer did not have a competent person perform frequent and regular inspections of the jobsite to identify and correct working conditions which were hazardous and dangerous.
Recent events (2)
  • — I (S) $3803
  • — Z (S) $3803

1926.21 B02

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to work and to control or eliminate any hazards.  (a) Jobsite - Employees were not instructed on the recognition, avoidance of unsafe conditions related to the hazards associated with working in proximity to moving equipment and how to control and eliminate those relevant hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.28 A

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $3803.00
29 CFR 1926.28(a): The employer did not require the wearing of appropriate personal protective equipment in all operations where there is an exposure to hazardous conditions.  (a) Jobsite - Employees were not provided with or utilizing high visibility clothing while working around and behind, and in areas where the operators view was obstructed while driving the Kabota SVL-90-2 Compact Track Loader and International Dump Truck.
Recent events (2)
  • — I (S) $3803
  • — Z (S) $3803

1926.602 A09 I

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $0.00 Reduced
29 CFR 1926.602(a)(9)(i): Bidirectional machine(s) were not equipped with an operable horn, distinguishable from the surrounding noise level, which could be operated as needed when the machine is moving in either direction.    (a)Jobsite - Employees were exposed to crushing and struck by hazards, where the bidirectional Kabota SVL 90-2 Compact Track Loader did not have an operable backup alarm which operated when the machine was moving in reverse.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3803

1926.602 A09 II

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $3803.00
29 CFR 1926.602(a)(9)(ii): No employer shall permit earthmoving or compacting equipment which has an obstructed view to the rear to be used in reverse gear unless the equipment has in operation a reverse signal alarm distinguishable from the surrounding noise level or an employee signals that it is safe to do so.    (A)  Jobsite - Employees were exposed to crushing and struck by hazards when earth moving equipment which had an obstructed view to the rear was used in reverse when this equipment did not have an operable reverse signal alarm (backup alarm) or an employee signaling that the equipment could be operated safely in reverse.
Recent events (2)
  • — I (S) $3803
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341708956.