OSHA Inspection: ALTA MAX, LLC

Issued

2016-12-07 00:00:00

Abate by

2017-01-11 00:00:00

Penalty

Initial $3741.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy:      a) On or about November 8, 2016, the employer did not develop written procedures with specific steps for the control of potentially hazardous energy regarding machines and equipment such as, but not limited to:    1. Crest Die Press    2. Rouselle Punch Press    3. Thomson Die Press    4. Lawson Guillotine (2)

Issued

2016-12-07 00:00:00

Abate by

2016-12-27 00:00:00

Penalty

Initial $8730.00 · Current $3492.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips:      a) 246 Harbor Cir., New Orleans, LA; On or about November 8, 2016, the employer allowed employees to operate the following equipment while not equipped with a fixed or movable guard to protect against point of operation injuries and contact with rotating parts:    1. Rosenthal Cutter    2. FX Hooper Co. Slotter

Issued

2016-12-07 00:00:00

Abate by

2017-01-11 00:00:00

Penalty

Initial $3741.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.1200(f)(6): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein:      a) Behind the Crest Die Press; On or about November 8, 2016, the employer did not ensure all containers were properly labeled.  The condition applies to an unlabeled plastic container of used motor oil.

Issued

2016-12-07 00:00:00

Abate by

2017-01-11 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:   a) 246 Harbor Cir., New Orleans, LA; On or about November 8, 2016, the employer failed to ensure that the individual breakers inside the electrical panel behind the Crest Die Press were labeled.