Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: CARLISLE MASONRY CONSTRUCTION, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CARLISLE MASONRY CONSTRUCTION, INC. in 245 E. MAIN STREET, NEW ALBANY, OH 43054 (NAICS 238140). OSHA activity number 341903797.

Watch Carlisle Masonry Construction, INC. — free Get an email when a new federal OSHA severe-injury report for Carlisle Masonry Construction, INC. is published. One employer, no account, unsubscribe in one click.
Site address
245 E. MAIN STREET
City
NEW ALBANY
State
OH
ZIP
43054
Mailing
6300 VAN FOSSEN ROAD, JOHNSTOWN, OH 43031
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
27
Ownership type
A

3 citations on file for this inspection.

1926.451 G04 II

Serious Gravity 5 1 instance 6 exposed
Issued
Penalty
Initial $4770.00 · Current $3339.00 Reduced
29 CFR 1926.451(g)(4)(ii): The top edge height of toprails or equivalent member on supported scaffolds manufactured or placed in service after January 1, 2000 shall be installed between 38 inches (0.97 m) and 45 inches (1.2 m) above the platform surface. The top edge height on supported scaffolds manufactured and placed in service before January 1, 2000, and on all suspended scaffolds where both a guardrail and a personal fall arrest system are required shall be between 36 inches (0.9 m) and 45 inches (1.2 m). When conditions warrant, the height of the top edge may exceed the 45-inch height, provided the guardrail system meets all other criteria of paragraph (g)(4).   a. On or before November 10, 2016 where employees were working from a scaffold, a 2x4 was used as the only guardrail and was not placed between 38 and 44 inches from the platform surface, thereby exposing the employees to a 17 foot fall hazard.
Recent events (2)
  • — I (S) $3339
  • — Z (S) $4770

1926.451 G04 IV

Serious Gravity 5 1 instance 6 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(g)(4)(iv): When midrails are used, they shall be installed at a height approximately midway between the top edge of the guardrail system and the platform surface.   a. On or before November 10, 2016 where employees were working from a scaffold, the midrail was not installed at an even height approximately midway between the top edge of the guardrail system and the platform surface, thereby exposing the employees to a 17 foot fall hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 H02 II

Serious Gravity 5 1 instance 60 exposed
Issued
Penalty
Initial $3816.00 · Current $2671.00 Reduced
29 CFR 1926.451(h)(2)(ii): A toeboard shall be erected along the edge of platforms more than 10 feet (3.1 m) above lower levels for a distance sufficient to protect employees below, except on float (ship) scaffolds where an edging of 3/4 x 1 1/2 inch (2 x 4 cm) wood or equivalent may be used in lieu of toeboards.  a. On or before November 10, 2016 where employees were working from a scaffold, a toeboard was not installed along the opening where two scaffolds joined, thereby exposing employees below to a struck-by hazard.
Recent events (2)
  • — I (S) $2671.2
  • — Z (S) $3816

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341903797.