OSHA Inspection: PELLOCK CONSTRUCTION, INC.

Issued

2017-01-20 00:00:00

Abate by

2017-01-30 00:00:00

Penalty

Initial $2716.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames, and uprights did not bear on base plates and mud sills or other adequate firm foundation.      On or about October 27, 2016, employees were using fabricated frame scaffolding poles, legs, posts, frames, and uprights did not bear on mud sills.

Issued

2017-01-20 00:00:00

Abate by

2017-01-30 00:00:00

Penalty

Initial $3803.00 · Current $2716.00 Reduced

General-duty citation text

29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:      On or about October 26, 2016, employees were using a powered industrial vehicle platform at a height greater than 10 feet with no fall protection.

Issued

2017-01-20 00:00:00

Abate by

2017-01-30 00:00:00

Penalty

Initial $3803.00 · Current $3803.00

General-duty citation text

29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.      On or about October 27, 2016, employees were working from a roof performing carpenter work with no fall protection in place.

Issued

2017-01-20 00:00:00

Abate by

2017-02-03 00:00:00

Penalty

Initial $3803.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:       On or about October 27, 2016, employees who were exposed to fall hazards were not trained in fall protection procedures to recognize and minimize those hazards.