OSHA Inspection: JERSEY SHEET METAL & MACHINE, INC.

Issued

2017-05-04 00:00:00

Abate by

2017-05-31 00:00:00

Penalty

Initial $406.00 · Current $406.00

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  The employer did not provide abatement certification for inspection number 1196829 as indicated below:   1.      Citation 1 Item 1 pertaining to 29 CFR 1910.147(c)(1) which was issued on 12/21/16.  Abatement for this item was due on 02/09/2017.  2.      Citation 1 Item 2a pertaining to 29 CFR 1910.1200(e)(1) which was issued on 12/21/16.  Abatement for this item was due on 02/09/2017.  3.      Citation 1 Item 2b pertaining to 29 CFR 1910.1200(g)(8) which was issued on 12/21/16.  Abatement for this item was due on 02/09/2017.  4.      Citation 1 Item 2c pertaining to 29 CFR 1910.1200(h)(1) which was issued on 12/21/16.  Abatement for this item was due on 02/09/2017  5.      Citation 2 Item 1 pertaining to 29 CFR 1910.134(h)(1) which was issued on 12/21/16.  Abatement for this item was due on 02/09/2017.  Employer received citations on 01/05/2017.  Violations occurred on or about 12/13/2016.

Issued

2016-12-21 00:00:00

Abate by

2017-02-09 00:00:00

Penalty

Initial $3563.00 · Current $3563.00

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  (a)Production area    The employer did not develop, document and utilize a lockout/tagout program, conduct periodic audits or provide employee training on energy control procedures for servicing and repair work on equipment, including but not limited to, Adira QH6325 brake press, Amada and Niagra IF12 shear machines and Bistronic Bystarr 3015 laser cutter.  Condition observed on or about 12/13/2016

Issued

2016-12-21 00:00:00

Abate by

2017-02-09 00:00:00

Penalty

Initial $3563.00 · Current $3563.00

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a)  Production area  The employer did not develop, implement and maintain a written hazard communication program for employees who use chemicals and products including but not limited to, acetone, Safety Kleen Parts Cleaning solvent, Sandvik stainless steel covered electrode 308L/316L and Sawcool 1550B.     Condition observed on or about 12/13/2016

Issued

2016-12-21 00:00:00

Abate by

2017-02-09 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical:  a)  Welding area  The employer did not maintain a safety data sheet for Sandvik stainless steel covered electrode 308L/316L used by welders during custom fabrication of sheet metal products.       Condition observed on or about 12/13/2016

Issued

2016-12-21 00:00:00

Abate by

2017-02-09 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a)  Production area  The employer did not provide training to employees exposed to chemicals, including but not limited to, acetone, Safety Kleen Parts Cleaning solvent, Sandvik stainless steel covered electrode 308L/316L and Sawcool 1550B during fabrication of custom sheet metal products.      Condition observed on or about 12/13/2016

Issued

2016-12-21 00:00:00

Abate by

2017-02-09 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:  a)  Production area  The employees were not given the basic information on respirator usage, maintenance, storage, and the respirator's physiological effects when worn.  Employees voluntary use 3M N95 and Miller LPR-100 half face respirators while welding, grinding and sanding.  Condition occurred on or about 12/13/2016