Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: HUGO VAZQUEZ

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of HUGO VAZQUEZ in 151 COACH TURNER STREET, SAVANNAH, GA 31408 (NAICS 238110). OSHA activity number 341968568.

Watch Hugo Vazquez — free Get an email when a new federal OSHA severe-injury report for Hugo Vazquez is published. One employer, no account, unsubscribe in one click.
Establishment
HUGO VAZQUEZ
Site address
151 COACH TURNER STREET
City
SAVANNAH
State
GA
ZIP
31408
Mailing
153 MALLORY DRIVE, REIDSVILLE, GA 30453
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238110
Employees
8
Ownership type
A

3 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 3 instances 3 exposed
Issued
Penalty
Initial $2272.00 · Current $2272.00
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents.  a) Jobsite  On or about December 9, 2016, employees were allowed to use electric hand power tools without using  eye protection such as safety glasses, as a result exposing employees to ricocheting and flying debris hazards.   1. Makita 5007F 120 Volt Double Insulated Circular Saw  2. Milwaukee 120 Volt Hammer Drill S/N G43BD160303130 3. DeWalt Battery Powered Drill
Recent events (1)
  • — Z (S) $2272

1926.404 F06

Other-than-serious 1 instance 1 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous:  a) Jobsite-On or about December 9, 2016, an employee was using a yellow 12 AWG extension cord without a ground prong attached.  The extension cord with missing ground supplied power to double insulated portable electric circular saw (Makita 5007F), exposing an employee to a shock and electrical hazard.
Recent events (1)
  • — Z (O) $0

1926.405 G02 IV

Other-than-serious 2 instances 3 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws:  a) Jobsite - On or about December 9, 2016, employees were using a yellow 12 AWG extension cord that was used to supply power to 120 V electric circular saw (Makita 5007F) black power cord without strain-relief in that the outside protective sheath was pulled from the neck, exposing employees to electric and shock hazards.    b) Jobsite - On or about December 9, 2016, employees were using a orange 12 AWG extension cord that was used to supply power to 120 V electric Milwaukee Hammer drill (Milwaukee Hammer Drill S/N G43BD160303130) black power cord without strain-relief at the temporary power pole, in that the outside protective sheath was pulled from the neck, exposing employees to electric and shock hazards.
Recent events (1)
  • — Z (O) $0

View HUGO VAZQUEZ's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341968568.