OSHA Inspection: PROCOMM, INC. OF HOOPESTON, ILLINOIS

Issued

2017-04-24 00:00:00

Abate by

2017-06-16 00:00:00

Penalty

Initial $4310.00 · Current $2155.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1):    29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):    On or about December 15, 2016 employees were exposed to contact with the unguarded portion of the pulleys on the antenna winding machines because pulley nip points were not guarded.

Issued

2017-04-24 00:00:00

Abate by

2017-06-16 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(e)(1)(i):     Horizontal belts  seven (7) feet or less from the floor level shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.      On or about December 15, 2016 employees were exposed to contact with horizontal belts on the antenna winding machines because the belts were not guarded.

Issued

2017-04-24 00:00:00

Abate by

2017-06-16 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(e)(3)(i):      Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1010.219(m) and (o):    On or about December 15, 2016 employees were exposed to contact with vertical belts on the antenna winding machines because the belts were not guarded.

Issued

2017-04-24 00:00:00

Abate by

2017-06-16 00:00:00

Penalty

Initial $4310.00 · Current $2155.00 Reduced

General-duty citation text

29 CFR 1910.219(f)(3):    Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed:    On or about December 15, 2016 employees were exposed to nip and sheer points on the antenna winding machines because the sprockets and chain on the mechanism that spaces the wire was not enclosed.