2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: AMARILLO STEEL FABRICATION AND MACHINE, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of AMARILLO STEEL FABRICATION AND MACHINE, INC. in 610 S. CROCKETT STREET, AMARILLO, TX 79106 (NAICS 332312). OSHA activity number 341988343.

Watch Amarillo Steel Fabrication AND Machine, INC. — free Get an email when a new federal OSHA severe-injury report for Amarillo Steel Fabrication AND Machine, INC. is published. One employer, no account, unsubscribe in one click.
Site address
610 S. CROCKETT STREET
City
AMARILLO
State
TX
ZIP
79106
Mailing
2801 PARAMOUNT BLVD., AMARILLO, TX 79109
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
6
Ownership type
A

5 citations on file for this inspection.

1910.178 L

Serious Gravity 10 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $2662.00 Reduced
29 CFR 1910.178(l): Operators were not trained in the safe operation of powered industrial trucks:    Employees operating powered industrial trucks (forklifts) had not been trained prior to operating them and exposed to struck-by hazards.
Recent events (2)
  • — I (S) $2662.1
  • — Z (S) $3803

1910.179 J02

Serious Gravity 10 2 instances 6 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $2662.00 Reduced
29 CFR 1910.179(j)(2): The following items were not be inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, including observation during operation for any defects which might appear between regular inspections:    Employees were exposed to struck-by hazards while operating the overhead crane that had not inspected.
Recent events (2)
  • — I (S) $2662.1
  • — Z (S) $3803

1910.179 J03

Serious Gravity 10 2 instances 6 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.179(j)(3): Complete inspections of the crane was not being performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section:  Employees were exposed to struck-by hazards while operating the overhead cranes in the front shop that had been inspected periodically.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.252 B02 III

Serious Gravity 10 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $2662.00 Reduced
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields:    Employees of Amarillo steel working in the shop were exposed to hazards associated with arc welding rays because noncombustible or flameproof screens or shields were not put up around employees who were welding.
Recent events (2)
  • — I (S) $2662.1
  • — Z (S) $3803

1910.253 B04 I

Serious Gravity 10 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $2662.00 Reduced
29 CFR 1910.253(b)(4)(i): Oxygen cylinders were stored near highly combustible material, especially oil and grease; or near reserve stocks of carbide and acetylene or other fuel-gas cylinders, or near other substance likely to cause or accelerate fire;    The employer did not ensure oxygen cylinders at the back of the front shop were stored away from acetylene cylinders, exposing employees to fire hazards.
Recent events (2)
  • — I (S) $2662.1
  • — Z (S) $3803

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341988343.