Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: GUADALUPE RODRIGUEZ SANCHEZ

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of GUADALUPE RODRIGUEZ SANCHEZ in LOT #8 3394 BRYERSTONE CIRCLE, SMYRNA, GA 30080 (NAICS 238170). OSHA activity number 342019684.

Watch Guadalupe Rodriguez Sanchez — free Get an email when a new federal OSHA severe-injury report for Guadalupe Rodriguez Sanchez is published. One employer, no account, unsubscribe in one click.
Site address
LOT #8 3394 BRYERSTONE CIRCLE
City
SMYRNA
State
GA
ZIP
30080
Mailing
137 SQUIRREL ROAD, CLARKS HILL, SC 29821
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238170
Employees
3
Ownership type
A

3 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 2 instances 3 exposed
Issued
Penalty
Initial $2173.00 · Current $2173.00
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical agents:  (a) Residential construction located on Lot #8, Cut bench: On or about January 11, 2017, and at times prior, the employer exposed employees to eye injuries while cutting cornice board materials and siding, in that protective eyewear was not provided or used while operating Makita (Model 5007F) 7-1/4-inch circular saws.  (b) Residential construction located on Lot #8, Pump Jack scaffold system: On or about January 11, 2017, and at times prior, the employer exposed employees to eye injuries while operating nail guns at 130 PSI while installing siding and cornice boards, in that protective eyewear was not provided during installation.
Recent events (1)
  • — Z (S) $2173

1926.304 D

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $3803.00 · Current $3803.00
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe:  (a) Residential construction located on Lot #8, Cut bench: On or about January 11, 2017, and at times prior, the employer exposed an employee to amputation hazards while cutting cornice board material with two circular saws without the lower guard in place, in that the saw operator used a shim to prevent the lower guard from retracting after the a cut was made through the siding and cornice materials.
Recent events (1)
  • — Z (S) $3803

1926.451 G01 VII

Serious Gravity 10 1 instance 2 exposed
Issued
Penalty
Initial $3803.00 · Current $3803.00
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section.  (a) New residential construction located on Lot #8, Front side of structure on pump jack scaffold: On or about January 11, 2017, and at times prior, the employer exposed employees to fall hazards of approximately 30 feet from the pump jack scaffold work platform to the lower level, in that personal fall arrest was not provided to employees installing cornice boards and siding.
Recent events (1)
  • — Z (S) $3803

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342019684.