Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MAX G CONSTRUCTION, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MAX G CONSTRUCTION, LLC in N70 W27744 LESLIE LANE, MERTON, WI 53056 (NAICS 238160). OSHA activity number 342020401.

Watch MAX G Construction, LLC — free Get an email when a new federal OSHA severe-injury report for MAX G Construction, LLC is published. One employer, no account, unsubscribe in one click.
Site address
N70 W27744 LESLIE LANE
City
MERTON
State
WI
ZIP
53056
Mailing
2059 S. LAYTON BLVD, MILWAUKEE, WI 53215
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
7
Ownership type
A

5 citations on file for this inspection.

1926.20 B02

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $4000.00
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):    (a) The employer did not ensure that worksite inspections were conducted that addressed elements such as, but not limited to, fall hazards, struck-by hazards and electrical hazards.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $3803

1926.1053 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2173.00 · Current $0.00 Reduced
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:    (a) The employer did not ensure that ladders used for access were at least (3) feet above the landing surface.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2173

1926.1053 B06

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $0.00 Reduced
29 CFR 1926.1053(b)(6): Unsecured ladder(s) were used on surfaces that were not stable and level:    (a) The employer did not ensure that extension ladders, used for roofing work on a residential building, were secured.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3803

1926.503 A01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $1000.00 Reduced
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    (a) The employer did not ensure that employees were trained in recognizing fall hazards and implementing fall protection when conducting roofing work on a residential building.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $3803

1926.501 B13

Repeat Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $7605.00 · Current $5000.00 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):     (a) The employer did not ensure that employees were using fall protection when conducting roofing work on a residential building.     Max G Construction was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(10), which was contained in OSHA inspection number 1066354, citation number 01, item number 01 and was affirmed as a final order on August 7, 2015, with respect to a workplace location at 2510 Alpine Rd., Rockford, IL 61109.
Recent events (2)
  • — I (R) $5000
  • — Z (R) $7605

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342020401.