HUNTSVILLE, AL —
OSHA Inspection: CDI ELECTRONICS, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CDI ELECTRONICS, LLC in 353 JAMES RECORD ROAD SW, HUNTSVILLE, AL 35824 (NAICS 336322). OSHA activity number 342027232.
Where did this inspection happen?
- Establishment
- CDI ELECTRONICS, LLC
- Site address
- 353 JAMES RECORD ROAD SW
- City
- HUNTSVILLE
- State
- AL
- ZIP
- 35824
- Mailing
- 353 JAMES RECORD ROAD SW, HUNTSVILLE, AL 35824
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336322
- Employees
- 59
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.133 A01
- Issued
- Abate by
- Penalty
- Initial $4310.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: (a) On or about 01/12/2017 - Main plant, potting area, employees working with corrosive chemicals such as, but not limited to, CHM-0051 Hardener and CHM-0050 Resin, were not required to wear chemical splash goggles and/or face shields.
Recent events (2)
- — I (S) $0
- — Z (S) $4310
1910.151 C
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $1758.00
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: (a) On or about 01/12/2017 - Main plant, potting area, employees working with corrosive chemicals such as, but not limited to, CHM-0051 Hardener and CHM-0050 Resin, were not provided an eyewash station for use in the event of an emergency.
Recent events (2)
- — I (S) $1758
- — Z (S) $0
1910.132 D01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): (a) On or about 01/12/2017 - Facility, the employer had not assessed all work activities, including working with corrosive chemicals, to select and have employees use the appropriate personal protective equipment such as eye and face protection.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Abate by
- Penalty
- Initial $4310.00 · Current $3000.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about 01/12/2017 - Maintenance shop, Grizzly G0602 Bench Top Metal Lathe, the chuck was not guarded. (b) On or about 01/12/2017 - Maintenance shop, Central Machinery 16 Speed Heavy Duty Drill Press, the chuck was not guarded.
Recent events (2)
- — I (S) $3000
- — Z (S) $4310
1910.215 A04
- Issued
- Abate by
- Penalty
- Initial $4310.00 · Current $3000.00 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: (a) On or about 01/12/2017 - Main plant, maintenance shop, the Alltrade 6-inch bench grinder was missing the work rest on the right side of the grinder.
Recent events (2)
- — I (S) $3000
- — Z (S) $4310
1910.215 B09
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: (a) On or about 01/12/2017 - Main plant, maintenance shop, the Alltrade 6-inch grinder was missing the tongue guard on the left side. (b) On or about 01/12/2017 - Main plant, maintenance shop, the Alltrade 6-inch grinder was not adjusted to at least one-fourth inch on the right side.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 D03
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(d)(3): The contact surface(s) of wheel(s), blotter(s) or flange(s) on grinding machine(s) were not flat and free or foreign matter: (a) On or about 01/12/2017 - Main plant, maintenance shop, Alltrade 6-inch grinder, small groves were observed in the stones.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 336322)
DELANO, MN—2025-10-28
110146 - PHILLIPS - TEMRO INDUSTRIES INC DBA ARCTIC FOX
SPOKANE, WA—2025-09-03
WA317987664 - HOTSTART MANUFACTURING INC
MADISON HEIGHTS, MI—2021-12-02 00:00:00
CNI INC
SARDIS, KY—2021-07-07 00:00:00
63923 - MITSUBISHI ELECTRIC AUTOMOTIVE AMERICA INC
WATSON, IN—2021-05-21 00:00:00
111938 - PARKER HANNIFIN
More inspections in AL
FAIRHOPE, AL—2026-07-16
FRANCISCO ARES
LOXLEY, AL—2026-07-16
CARLOS CHE
TRUSSVILLE, AL—2026-07-16
ALL SOUTH STEELWORX, LLC
CLANTON, AL—2026-07-13
UBIQUE TECHNOLOGIES, INC.
IRONDALE, AL—2026-07-13
FATHER NATURE LANDSCAPES OF BIRMINGHAM, INC.
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342027232.