Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: CHAMBERLIN DALLAS LLC

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of CHAMBERLIN DALLAS LLC in 3111 N HOUSTON STREET, DALLAS, TX 75201 (NAICS 236116). OSHA activity number 342069887.

Watch Chamberlin Dallas LLC — free Get an email when a new federal OSHA severe-injury report for Chamberlin Dallas LLC is published. One employer, no account, unsubscribe in one click.
Site address
3111 N HOUSTON STREET
City
DALLAS
State
TX
ZIP
75201
Mailing
2170 DIPLOMAT DRIVE, FARMERS BRANCH, TX 75234
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236116
Employees
8
Ownership type
A

3 citations on file for this inspection.

1926.451 F03

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $11408.00 · Current $12675.00
29 CFR 1926.451(f)(3): Scaffolds and scaffold components were not inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity:    (a) This violation occurred on or about January 31, 2017 in the east side of the jobsite where employees were working from a scaffold platform that had visible defects in the wooden planks and had not been inspected before the work shift by a competent person exposing employees to a fall hazard of approximately 54 feet to the ground below.
Recent events (2)
  • — I (S) $12675
  • — Z (S) $11408

1926.451 B01 I

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $11408.00 · Current $0.00 Reduced
29 CFR 1926.451(b)(1)(i): Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) was not installed so that the space between adjacent units and the space between the platform and the uprights were no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary:    (a) This violation occurred on or about January 31, 2017 in the east side of the jobsite where employees were working from a scaffold platform that had gaps larger than 1 inch between adjacent planks and employees were exposed to a trip and fall hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $11408

1926.451 B05 II

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $11408.00 · Current $0.00 Reduced
29 CFR 1926.451(b)(5)(ii): The end of a platform greater than 10 feet in length extended over its support more than 18 inches and the platform was not designed and installed so that the cantilevered portion of the platform is able to support employees without tipping, or has guardrails which block employee access to the cantilevered end:    (a)This violation occurred on or about January 31, 2017 in the east side of the jobsite where employees were walking on 16 feet platforms that were not designed and installed so that the cantilevered portion of the platform was able to support employees without tipping. Employees were exposed to a fall hazard of approximately 54 feet to the ground below.
Recent events (2)
  • — I (S) $0
  • — Z (S) $11408

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342069887.