LOUISVILLE, CO —
OSHA Inspection: SERVTECH
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SERVTECH in 333 CENTENNIAL PKWY. STE. A, LOUISVILLE, CO 80027 (NAICS 335313). OSHA activity number 342081858.
Watch Servtech — free
Get an email when a new federal OSHA severe-injury report for Servtech is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- SERVTECH
- Site address
- 333 CENTENNIAL PKWY. STE. A
- City
- LOUISVILLE
- State
- CO
- ZIP
- 80027
- Mailing
- 333 CENTENNIAL PKWY. STE. A, LOUISVILLE, CO 80027
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 335313
- Employees
- 43
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Abate by
- Penalty
- Initial $5387.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section: (a) Servtech at 333 Centennial Pkwy. Louisville, CO: On or before 1/19/2017, the employer had not developed specific procedures to ensure that the hazardous energy associated with the Drill-Line CNC hole cutting machine (Ocean Machinery, Model: MDL-1000/1C, Custom Avenger 40, SN: A002943), including, but not limited to, electrical and hydraulic energy, was isolated and rendered inoperative. The employer did not develop specific lockout tagout procedures for this machine when changing out drill bits and when performing maintenance. Employees were exposed to amputation hazards.
Recent events (3)
- — F (S) $0
- — C (S) $5387
- — Z (S) $5387
1910.147 C06 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $5387.00
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed: (a) Servtech at 333 Centennial Pkwy. Louisville, CO: On or before 1/19/2017, the employer had not conducted periodic inspections of all energy control procedures including but not limited to the Drill-Line CNC hole cutting machine (Ocean Machinery, Model: MDL-1000/1C, Custom Avenger 40, SN: A002943), to ensure all energy sources capable of causing injury are isolated and rendered inoperative prior to servicing and or maintenance. This condition exposed employees to amputation hazards.
Recent events (3)
- — F (S) $5387
- — C (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: (a) Servtech at 333 Centennial Pkwy. Louisville, CO: On or before 1/19/2017, the employer did not ensure that employees required to use machines with multiple energy sources, such as, but not limited to the Machine Direction Orient Drill-Line CNC hole cutting machine (Ocean Machinery, Model: MDL-1000/1C, Custom Avenger 40, SN: A002943), were given specific lockout tagout training or guidance. Employees were therefore not protected form hazardous energy. This condition exposed employees to amputation hazards.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Abate by
- Penalty
- Initial $5387.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, was not guarded. The guarding device was not in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, was not so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle: (a) Servtech at 333 Centennial Pkwy. Louisville, CO: On or before 1/19/2017, the employer did not ensure that the point of operation on the Drill-Line CNC hole cutting machine (Ocean Machinery, Model: MDL-1000/1C, Custom Avenger 40, SN: A002943) was guarded to prevent injuries. An employee was caught in the clamp of a Drill-Line CNC hole cutting machine (Ocean Machinery, Model: MDL-1000/1C, Custom Avenger 40, SN: A002943) caused by the lack of machine guarding. this condition exposed employees to amputation hazards.
Recent events (3)
- — F (S) $0
- — C (S) $5387
- — Z (S) $5387
1904.39 A02
- Issued
- Abate by
- Penalty
- Initial $1000.00 · Current $1000.00
General-duty citation text
29 CFR 1904.39(a)(2): Basic Requirement. Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA. (a) Servtech at 333 Centennial Pkwy. Ste. A Louisville, CO: On or before 1/19/2017, the employer did not report an amputation that occurred at work within 24 hours. The employer reported this incident to OSHA after one calendar week.
Recent events (3)
- — F (O) $1000
- — C (O) $1000
- — Z (O) $1000
More inspections in this industry (NAICS 335313)
POLK, PA—2026-06-25
VOYTEN ELECTRIC AND ELECTRONICS, INC.
REMLAP, AL—2026-05-28
SOUTHEASTERN MANUFACTURING INC
BEAVER, PA—2026-03-04
EATON CORPORATION
BEAVER, PA—2026-03-04
EATON CORPORATION
COVERT, MI—2026-02-09
SIEMENS ENERGY, INC.
More inspections in CO
CASTLE ROCK, CO—2026-07-10
MASTER MAGNETICS, INC.
STRASBURG, CO—2026-07-08
JUNIOR ROOFING LLC
FORT COLLINS, CO—2026-07-08
EDWARDS SEMICONDUCTOR SOLUTIONS LLC
CENTENNIAL, CO—2026-07-08
JORDY CONSTRUCTION
HIGHLANDS RANCH, CO—2026-07-08
HOWELL CONSTRUCTION
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342081858.