OSHA Inspection: PELLEGRINO CONSTRUCTION LLC

Issued

2017-07-11 00:00:00

Penalty

Initial $3803.00 · Current $3803.00

General-duty citation text

29 CFR 1926.451(c)(2)(v): The employer used forklifts  to support scaffold platforms without ensuring that the entire platform was attached to the fork and that the forklift was not moved horizontally while the platform was occupied:  a) Arden Dinner Theater - On or about February 1, 2017, the employer allowed employees to stand on a wooden pallet  which was not attached to the forks on a "Gradall/All Terrain Fork Lift" elevated approximately 20 feet above grade.

Issued

2017-07-11 00:00:00

Abate by

2017-08-04 00:00:00

Penalty

Initial $1630.00 · Current $1630.00

General-duty citation text

29 CFR 1926.501(b)(4)(ii): Each employee on a walking/working surface was not protected from tripping in or stepping into or through holes by covers.  a) Arden Dinner Theater- On or about February 1, 2017, the employer did not cover multiple floor holes that were observed on a walking/working surface being renovated in the dinner theater. The multiple floor openings ranged in sizes between approximately 6"x4" and 4"x4".

Issued

2017-07-11 00:00:00

Abate by

2017-08-04 00:00:00

Penalty

Initial $1630.00 · Current $1630.00

General-duty citation text

29 CFR 1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer.  a) Arden Dinner Theater -On or about February 1, 2017, the employer did not provide a written certification associated with training for their employees who were exposed to a fall hazard of approximately 20 feet and not able to recognize the hazard of falling.  The training program must enable the employees to recognize the hazards of falling and must train each employee in the procedures to be followed in order t minimize these hazards. Each employee must be trained by a competent person in the following: 1.  The nature of fall hazards in the work area;  2.  The correct procedures for erecting, maintaining, disassembling, and inspecting the fall protection systems to be used;  3.  The use and operation of guardrail systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used;  4.  The role of each employee in the safety monitoring system when this system is used;  5.  The limitations on the use of mechanical equipment during the performance of roofing work on low-sloped roofs;  6.  The correct procedures for the handling and storage of equipment and materials and the erection of overhead protection;  7.  The role of employees in fall protection plans;  8.  The standards contained in this subpart.     The employer must verify compliance with paragraph (a) of this section by preparing a written certification record that will contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer.