Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: SHAWN CORBITT

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SHAWN CORBITT in 4044 IVYDALE CT, VALDOSTA, GA 31601 (NAICS 236115). OSHA activity number 342123213.

Watch Shawn Corbitt — free Get an email when a new federal OSHA severe-injury report for Shawn Corbitt is published. One employer, no account, unsubscribe in one click.
Establishment
SHAWN CORBITT
Site address
4044 IVYDALE CT
City
VALDOSTA
State
GA
ZIP
31601
Mailing
121 BAY BRANCH DR, STATENVILLE, GA 31648
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236115
Employees
4
Ownership type
A

7 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2173.00 · Current $1304.00 Reduced
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:    a) At the job site, on or about February 09, 2017, employees exposed to overhead hazards were not wearing a hard hat, exposing employees to struck-by hazards.
Recent events (2)
  • — I (S) $1303.8
  • — Z (S) $2173

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2173.00 · Current $1304.00 Reduced
1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:    a) In front of building, on or about February 09, 2017, an employee was observed not wearing eye protection while operating a circular cutting saw, which exposed the worker to eye injuries from flying debris.
Recent events (2)
  • — I (S) $1303.8
  • — Z (S) $2173

1926.501 B13

Serious Gravity 5 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $3259.00 · Current $1955.00 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):     a) At the job site, in front of the building inside the trusses, on or about February 09, 2017, an employee was performing framing work on a new one-story residence without any means of fall protection, exposing the employee to a 9-foot fall hazard.      b) At the job site, roof deck, on or about February 09, 2017, an employee was working from the roof installing plywood decking onto the wooden trusses without any means of fall protection, exposing the employee to a 9-foot fall hazard.
Recent events (2)
  • — I (S) $1955.4
  • — Z (S) $3259

1926.503 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3259.00 · Current $1955.00 Reduced
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    a) At the job site, on or about February 09, 2017, two employees were performing framing work from the roof deck and trusses of a building being constructed without being trained, exposing them up to a 9-foot fall hazard.
Recent events (2)
  • — I (S) $1955.4
  • — Z (S) $3259

1926.1060 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1060(a)(1): The employer did not provide a training program for each employee using ladders as necessary, enabling each employee to recognize hazards related to ladders and the procedures to be followed to minimize these hazards:    a) At the job site, on or about February 09, 2017, an employee using an 8-foot A frame step ladder to access the ceiling joists was not provided ladder safety training. As a result the employee was exposed to an 8-foot fall hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1053 B04

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2173.00 · Current $1304.00 Reduced
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed:    a) At the construction site, on or about February 09, 2017, an employee used a closed 8-foot A frame step ladder leaned up against the wall, exposing the employee to a fall hazard.
Recent events (2)
  • — I (S) $1303.8
  • — Z (S) $2173

1926.1053 B13

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step:    a)  At the construction site, on or about February 09, 2017, an employee used the top two steps of a closed 8-foot A frame step ladder leaned up against the wall, exposing the employee to a fall hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342123213.