OSHA Inspection: DIESEL SOURCE, INC

Issued

2017-03-24 00:00:00

Abate by

2017-04-05 00:00:00

Penalty

Initial $2173.00 · Current $1304.00 Reduced

General-duty citation text

29 CFR 1910.179(g)(1)(v): Pendant control box(es) were not clearly marked for identification of functions:   a) Shop area; On or about March 14, 2017, the employer failed to ensure that an overhead gantry crane had all buttons on control box marked to identify its functionality.

Issued

2017-03-24 00:00:00

Abate by

2017-04-12 00:00:00

Penalty

Initial $2897.00 · Current $1738.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle:   a) Shop area; On or about March 14, 2017, the employer failed to ensure a Delta drill press had a guard around the bit.

Issued

2017-03-24 00:00:00

Abate by

2017-04-12 00:00:00

Penalty

Initial $2897.00 · Current $1738.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work:   a) Shop area; On or about March 14, 2017, the employer failed to ensure a Delta bench grinder was equipped with a work rest.

Issued

2017-03-24 00:00:00

Abate by

2017-04-12 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:   a) Shop area; On or about March 14, 2017, the employer failed to ensure a Delta bench grinder had tongue guard to prevent struck-by injuries.

Issued

2017-03-24 00:00:00

Abate by

2017-04-28 00:00:00

Penalty

Initial $2173.00 · Current $1304.00 Reduced

General-duty citation text

29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one half-hour:   a) Shop area; On or about march 14, 2017, the employer allowed compressed gas cylinders containing oxygen and compressed gas cylinders containing acetylene to be stored together. The cylinders were not separated by a fire resistant barrier or a distance of at least 20 feet.

Issued

2017-03-24 00:00:00

Abate by

2017-04-05 00:00:00

Penalty

Initial $2173.00 · Current $1304.00 Reduced

General-duty citation text

29 CFR 1910.1200(f)(6): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier, signal word, hazard statement(s), pictogram(s), precautionary statement(s) and name, address, and telephone number of the chemical manufacturer, importer, or other responsible party.   a) Shop area; On or about March 14, 2017, the employer did not ensure that all containers were properly labeled. This condition applies to an unlabeled 5-gallon container of waste oil and an unlabeled 5-gallon container of solvent.

Issued

2017-03-24 00:00:00

Abate by

2017-04-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:   a) Shop area; On or about March 14, 2017, the employer allowed scrap metal to be stored underneath and in front of a fire extinguisher. The scrap metal blocked access to the fire extinguisher.