Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: PRESTIA TUCKPOINTING, LTD

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PRESTIA TUCKPOINTING, LTD in 905 W. GOLF ROAD, MOUNT PROSPECT, IL 60056 (NAICS 238140). OSHA activity number 342181328.

Watch Prestia Tuckpointing, LTD — free Get an email when a new federal OSHA severe-injury report for Prestia Tuckpointing, LTD is published. One employer, no account, unsubscribe in one click.
Site address
905 W. GOLF ROAD
City
MOUNT PROSPECT
State
IL
ZIP
60056
Mailing
2091 TUNBRIDGE TRAIL, ALGONQUIN, IL 60102
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
3
Ownership type
A

4 citations on file for this inspection.

1926.451 B01

Serious Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $2055.00 Reduced
29 CFR 1926.451(b)(1): Platform(s) on all working levels of scaffolds, were not fully planked or decked between the front uprights and guardrail supports:        a) On or about March 20, 2017, employees were exposed to the hazard of falling approximately 18 feet while working from scaffolding that was not fully planked.       In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $2055
  • — Z (S) $3803

1926.451 E01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2716.00 · Current $1490.00 Reduced
29 CFR 1926.451(e)(1): Safe access was not provided to scaffold platforms when the platforms were more than 2 feet (0.6 m) above or below a point of access:            a) On or about March 20, 2017, employees were exposed to the hazard of falling approximately 20 feet where safe access between a roof deck/top of a masonry wall and the landing surface of a scaffold platform was not provided. The break in elevation between the roof deck/top of masonry wall was about 3 feet at an exposure height of about 20 feet.         In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1490
  • — Z (S) $2716

1926.451 G01

Serious Gravity 10 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $2055.00 Reduced
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level:              a) On or about March 20, 2017, employees were exposed to the hazard of falling approximately 18 feet while working from scaffolding without a guardrail system or other fall protection.    b) On or about March 20, 2017, employees were exposed to the hazard of falling approximately 17 feet while working from scaffolding without a guardrail system or other fall protection.       In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $2055
  • — Z (S) $3803

1926.501 B01

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $0.00 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:     a) On or about March 20, 2017, employees were exposed to the hazard of falling approximately 17 feet while working from a roof deck surface work without fall protection.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3803

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342181328.