Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: PERSONAL FRAMERS, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PERSONAL FRAMERS, LLC in 4910 HUNT RD, BLUE ASH, OH 45242 (NAICS 238130). OSHA activity number 342188026.

Watch Personal Framers, LLC — free Get an email when a new federal OSHA severe-injury report for Personal Framers, LLC is published. One employer, no account, unsubscribe in one click.
Site address
4910 HUNT RD
City
BLUE ASH
State
OH
ZIP
45242
Mailing
PO BOX 261, CRESTWOOD, KY 40014
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
2
Ownership type
A

3 citations on file for this inspection.

1926.20 B02

Deleted Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $0.00 Reduced
29 CFR 1926.20(b)(2): Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers.  There was no frequent and regular inspections being performed by a competent person to ensure the job-site, materials and equipment such as residential fall protection systems and/or devices were being maintained and utilized in a safe condition.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3803

1926.21 B02

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $1000.00 Reduced
1926.21(b)(2): "Safety training and education". The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury.      Located on the north side of a commercial structure, employees were observed performing wall erection while standing at the unprotected edge that were not trained in their language of origin (Spanish) and/or presented information in a manner that employees could understand how to minimize those hazards. Potential fall height was measured to be greater than 23 feet above the hard ground below while not utilizing a fall protection system.
Recent events (2)
  • — I (O) $1000
  • — Z (S) $3803

1926.501 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $1000.00 Reduced
29 CFR 1926.501(b)(1): "Unprotected sides and edges". Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.    Located on the north side of a commercial structure, employees were exposed to a fall hazard while performing wall erection at the unprotected edge of a third story floor area while not utilizing a fall protection system. Potential fall height was measured to be greater than 23 feet above the hard ground below.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $3803

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342188026.