Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

BUHL, ID —

OSHA Inspection: T & L CEDAR LAWN FURNITURE, INC.

Planned inspection · Safety discipline

At a glance

On , OSHA opened a planned safety inspection of T & L CEDAR LAWN FURNITURE, INC. in 331 S. BROADWAY, BUHL, ID 83316 (NAICS 337122). OSHA activity number 342267846.

Watch T & L Cedar Lawn Furniture, INC. — free Get an email when a new federal OSHA severe-injury report for T & L Cedar Lawn Furniture, INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
T & L CEDAR LAWN FURNITURE, INC.
Site address
331 S. BROADWAY
City
BUHL
State
ID
ZIP
83316
Mailing
331 S. BROADWAY, BUHL, ID 83316

What kind of inspection was it?

Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
337122
Employees
7
Ownership type
A

Citations

5 citations on file for this inspection.

5(a)(1)

Deleted Serious Gravity 5 3 instances 6 exposed
Issued
Abate by
Penalty
Initial $2716.00 · Current $0.00 Reduced

General-duty citation text

OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees:  a) Main Wood Shop:  Before April 17, 2017 and at times prior thereto; the employer did not ensure that stoking a wood fired pot-bellied stove in a production area would not create a combustible dust hazard.   Note* Abatement certification AND documentation IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2716

1910.22 A01

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $2716.00 · Current $1400.00 Reduced

General-duty citation text

29 CFR 1910.22(a)(1): Place(s) of employment were not kept clean.    a) Main Wood Shop: On or about April 17, 2017 and a times prior thereto; the area where wood sanding was performed had explosive wood dust located on ceiling duct work, equipment dust collection hoses and walls.       Note* Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2716

1910.22 A02

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.22(a)(2): The floor of each workroom was not maintained in a clean condition.    a) Main Wood Shop: On or about April 17, 2017 and a times prior thereto; the area where wood sanding and planing was performed had explosive wood dust located on the floors.        Note* Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 C02 VII

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(c)(2)(vii): An approved power-operated industrial trucks designated as DY, EE, or EX was not used  in an atmosphere in which combustible dust is not normally suspended in the air or is not likely to be thrown into suspension by the normal operation of equipment or apparatus in quantities sufficient to produce explosive or ignitable mixtures but where deposits or accumulations of such dust may be ignited by arcs or sparks originating in the truck.  a) Main wood shop: On or about April 17, 2017 and at times prior thereto; A gas powered Hyster H50FT Fortis, SN L177B01715C Powered Industrial Truck (PIT) entered and was parked inside the bay doors and was not approved to operate in an atmosphere that has Class II combustible dust.     Note* Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A01

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2173.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  Main Wood Shop - Southeast corner;  On or about April 17, 2017 and at times prior thereto; A wood-fire pot-bellied stove was missing a fixed guard over the belt and pulley on the motor in order to protect employees and operators from rotating parts that could catch clothing, or harm skin or body parts that could come in contact with moving parts.      Note* Abatement certification IS required for this Item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2173

More inspections in this industry (NAICS 337122)

More inspections in ID

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342267846.